HEB 300 275 JR 12m
91.260,00 EGP
Steel Beams are widely used throughout the construction industry when supporting heavy loads is required. Commonly termed an “I” Beam because of its shape, beams provide great load bearing support when used horizontally or standing as columns. Available in two configurations, the most popular being the Wide Flange Steel Beam aka H Beam or W Beam with non-tapered flanges. This beam shape has a wider profile for added horizontal strength, making it ideal for sky scrapers or as a house beam, along with bridge beams, trailers, platforms, etc. Standard American Beams, aka Junior Beams or S Beams, have tapered flanges for added strength when your load is concentrated on the flanges, such as machine bases, hoists, cranes or a trolley beam for your garage.
Description
الكمر الانجليزي(HEA – HEB)
يمكن استخدامه في جميع انواع التطبيقات و الاعمال وكثيراً ما يستخدم في الابنية الكبيرة و الضخمة مثل المصانع و المباني الشاهقة و غيرها , وكذلك الجسور و السفن ورفع و نقل الآلات و المعدات.
The HEB 300 steel beam in structural grade S275JR has a height of 300mm, a width of 300 mm, a unit weight of 117 kg/m, a web thickness of 11 mm, and a flange thickness of 19 mm, conforming to EN 10365 and EN 10025-2 standards.
- Total Height (h): 300 mm
- Flange Width (b): 300 mm
- Web Thickness (s or \(t_{w}\)): 11.0 mm
- Flange Thickness (t or \(t_{f}\)): 19.0 mm
- Cross-Sectional Area (A): 149 cm² (1491 mm²)
- Unit Mass / Weight: 117 kg/m
- Standard: EN 10025-2 (hot-rolled structural steel)
- Minimum Yield Strength: 275 MPa (for nominal thickness ≤ 16 mm, decreases slightly to 265 MPa for thicknesses between 16 mm and 40 mm)
- Tensile Strength: 410–560 MPa
- Moment of Inertia (\(I_{y}\) – Strong Axis): 2.516 × 10⁸ mm⁴
- Moment of Inertia (\(I_{z}\) – Weak Axis): 8.562 × 10⁷ mm⁴
- Elastic Section Modulus (\(W_{el,y}\)): 1.677 × 10⁶ mm³
- Plastic Section Modulus (\(W_{pl,y}\)): 1.868 × 10⁶ mm³
