فلانشة304 استانلس8 بوصة سمك 15مم 15× SS Flange 304 8 Inch
1.150,00 EGP
فلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤
Showing 865–880 of 2024 resultsSorted by popularity
-
فلانشة304 استانلس8 بوصة سمك 15مم
1.150,00 EGP -
-
فلانشة304 استانلس 6بوصة سمك 15مم < 15× p> SS Flange 304 6 Inch
1.150,00 EGPفلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤
-
فلانشة 304 استانلس استيل 4 بوصة سمك 10مم
550,00 EGPp> 304 SS Flange 4 Inch Thin 10 mm>
فلانشات استانلس استيل مواصفات مختلفة 304-316-321-310- استيراد وتصنيع عامية ومخرمة ومقلوظة وبرقبة وبشفة ومسلوبة ,وثابتة ومتحركة ….الخ باختلاف الجداول والضغوط والpn مقاسات من 3/8 بوصة الى 24 بوصة مع امكانية تصنيع وتخريم الفلانشات والطبب بمقاساتكم المختلفة من اي سمك بلازما او نظيفة بجودةعالية بمخارط وفرايز cnc
-
فلانشة 304 استانلس استيل 3 بوصة سمك 15مم
750,00 EGP304 SS Flange 3Inch Thin 15mm
فلانشة استانلس ٣٠٤ تصنيع محلي خامه اوروبيه امريكية او المانيه او هندية حسب المتوفر السمك ١٥ بالطلب ويوجد الي ٣٠مم واقل شيء بالطلب ٨مم او١٠ او١٢
-
فلانشة استانلس برقبة ٣١٦ ج ٤٠ مقاس ١٠ بوصة #٣٠٠
19.740,00 EGPSS Flange Wn 316 #300 sch 40 10 inch
Weld neck flanges are used in applications where the conditions are severe and critical. Some of these conditions include high pressure, wide fluctuations in temperature and pressure, high temperature, fluids that are volatile and hazardous, and temperatures in the sub-zero range.Weld neck flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.
During a dimensional inspection of weld neck flange, you should check for
- Outer & Inner Diameter of body
- Bolt Circle & Bolt hole Diameter
- the thickness of weld end
- Length of the Hub and
- Straightness and alignment of the bolt hole
-
Steem Globe Valve 8 Inch Carbon Steel -محبس جلوب بخار بالفلانشات كاربون استيل 8 بوصة بولاندي
17.500,00 EGPGlobe valves are linear motion closing-down valves in which the closure member is moved squarely on and off the seat. Usually the closure member is referred as a disc, irrespective of its shape. The seat opening varies in direct proportion to the travel of the disc. This proportional relationship between valve opening and disc travel is ideally suited for duties involving regulation of flow rate. Globe valves are most suitable for throttling and controlling fluid flow and are generally employed in small size piping
-
1.050,00 EGPكوع البان لحام استانلس استيل 316 90°DN80
Stainless Sanitary Weld Elbow 90° DN80
Sanitary Weld Elbow
Sanitary Weld Elbow is in the process system to change the fluid direction, it is a very important sanitary fittings to the installation. Sanitary weld elbow is made in material stainless steel 304 and 316 or specified grade, with the advantage of high cleanliness surface and corrosion resistance. Wellgreen offers sanitary welding fittings through 1/2” to 12” with standard 3A, DIN, SMS, BS, ISO, IDF, DS, BPF, I-Line etc, also we are ability to offer customized weld elbow and bend.
-
725,00 EGPلاكور البان 316DN80
Stainless Sanitary Union DN80 316
Sanitary DIN Union Fittings
Sanitary DIN Union Fittings are fabricated complying with DIN 11851 standard. Consisting of a round Slotted Nut, a Weld liner and Weld Male, and a o-ring seal. Wellgreen sanitary offers DIN sanitary union fittings assembling with different types
DIMENSION
DN10 – DN150
MATERIAL
T304, T316L, 1.4301, 1.4404
STANDARD
DIN 11851
SEALING GASKET
Silicone, EPDM, PTFE, Buna-N etc.
TEMPERATURE
-30°C / -22°F up to +120°C/ +248°F
APPLICATION
Pharmacy, Beer, Food, Petroleum, Dairy, Beverage,Biotech ,Cosmetics etc.
-
30,00 EGPنبل مسدس قلاووظ استانلس 304 1/4 بوصة
S.S304 Hexagon Nipple 1/4
We stock multiple sizes of stainless steel hex nipples.
We offer stainless steel hex nipples in 304 stainless steel and 316 stainless steel. Hex Nipples are NPT x NPT with a hex nut in the middle. NPT Threads conform to ASME B1.20.1.
Types: 150#
Sizes: 1/8″ – 4″
Grades: 304 – 316 -
450,00 EGPتية البان لحام 316DN80
316 Sanitary Weld Tee DN80
Sanitary Weld Tee
Sanitary Weld Tee Fittings includes reducing and equal tees, it is 3 ways ends sanitary fittings which with butt weld connected. Wellgreen offers sanitary butt weld fittings through 1/2” to 12” with standard 3A, DIN, SMS, BS, ISO, IDF, DS, BPF, I-Line etc,
Application Food, Brewery, Beverage, Dairy, Pharmaceutical, Fine chemical, Cosmetic etc. -
قفيز ماسورة مدور 2بوصة 304 بالمسمار Sanitary S.S 2 Inch 304 Round Oval Tube Hanger Bolt Pipe Holder
75,00 EGPSanitary Stainless Steel Pipe Holder
Body MaterialAISI 304 /
Available Size1″ ~ 12″
Type
Round / Hexagon / Oval
FastenerBoltRound Diameter
12.7mm ~ 304mm
ApplicationStainless Steel Pipe System -
قفيز ماسورة 316 اللبان مدور 80 مم بالمسمار
475,00 EGPSanitary Stainless Steel Pipe Holder
Body MaterialAISI 304 /
Available Size1″ ~ 12″
Type
Round / Hexagon / Oval
FastenerBoltRound Diameter
12.7mm ~ 304mm
ApplicationStainless Steel Pipe System -
525,00 EGPلاكور البان 304DN65
Stainless Sanitary Union DN65 304
Sanitary DIN Union Fittings
Sanitary DIN Union Fittings are fabricated complying with DIN 11851 standard. Consisting of a round Slotted Nut, a Weld liner and Weld Male, and a o-ring seal. Wellgreen sanitary offers DIN sanitary union fittings assembling with different types
DIMENSION
DN10 – DN150
MATERIAL
T304, T316L, 1.4301, 1.4404
STANDARD
DIN 11851
SEALING GASKET
Silicone, EPDM, PTFE, Buna-N etc.
TEMPERATURE
-30°C / -22°F up to +120°C/ +248°F
APPLICATION
Pharmacy, Beer, Food, Petroleum, Dairy, Beverage,Biotech ,Cosmetics etc.
-
250,00 EGPكوع البان لحام استانلس استيل 316 90°DN65
Stainless Sanitary Weld Elbow 90° DN65
Sanitary Weld Elbow
Sanitary Weld Elbow is in the process system to change the fluid direction, it is a very important sanitary fittings to the installation. Sanitary weld elbow is made in material stainless steel 304 and 316 or specified grade, with the advantage of high cleanliness surface and corrosion resistance. Wellgreen offers sanitary welding fittings through 1/2” to 12” with standard 3A, DIN, SMS, BS, ISO, IDF, DS, BPF, I-Line etc, also we are ability to offer customized weld elbow and bend.
Dimension of Sanitary Weld Elbow 90°- DIN W1012
Size
D
L
R
DN10
12
26
26
DN15
18
35
35
DN20
22
40
40
DN25
28
50
50
DN32
34
55
55
DN40
40
60
60
DN50
52
70
70
DN65
70
80
80
DN80
85
90
90
DN100
104
100
100
DN125
129
187
187
DN150
154
225
225
DN200
204
300
300
-
ماسورة لميع استانلس 304 DN65 سيملس 70مم سمك 2مم
4.500,00 EGPSS 304 Round Tube SMLS DN65 OD 70X2 mm
Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning