Showing 241–256 of 684 resultsSorted by popularity
-
-
-
-
-
كوع كاربون استيل 1.25 بوصة
145,00 EGPCarbon Steel Elbow 1.25Inch
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
-
Steem Globe Valve 8 Inch Carbon Steel -محبس جلوب بخار بالفلانشات كاربون استيل 8 بوصة بولاندي
17.500,00 EGPGlobe valves are linear motion closing-down valves in which the closure member is moved squarely on and off the seat. Usually the closure member is referred as a disc, irrespective of its shape. The seat opening varies in direct proportion to the travel of the disc. This proportional relationship between valve opening and disc travel is ideally suited for duties involving regulation of flow rate. Globe valves are most suitable for throttling and controlling fluid flow and are generally employed in small size piping
-
مسمار حديد صلب 8.8 سمك 16مم * 60 مم
40,00 EGPST BOLT 8.8 16mm*60mm
مسمار صلب درجة الصلابة 8.8 مقاسات متنوعة وبضاعة حاضرة خصم خاص للكميات
-
ماسورة حديد 1 بوصه 6متر سمك 2.5مم
515,00 EGPRound Steel Tube 1 Inch 2.5 mm 6 m
A513 DOM Round Steel Tube, is a welded mechanical round steel tube with the internal weld seam removed creating a smooth internal surface. DOM Round Steel Tube has been drawn over a mandrel to produce a tube having more exact dimensional accuracy and tolerances, and a very smooth inside and outside finish. DOM Round Steel Tube is ideal for more stressful applications requiring higher quality, increased mechanical properties, uniformity, strength, and soundness.
-
ماسورة حديد 2 بوصه 6متر سمك 3 مم
1.198,00 EGPRound Steel Tube 2 Inch 3 mm 6 m
Structural Steel Pipe, is a welded steel tube with an internal weld seam that is measured in nominal size unlike DOM or Welded Round Tube. A500 Steel Pipe is a economical structural grade pipe with a smooth bare finish that has slightly higher mechanical properties than standard pipe. Our A53 sch 80 Steel Pipe is a tested pipe that can be used for structural or pressure applications and may have a black coated finish.
-
لوح شبك حديد 1*2 م سمك 3 مم 25*25مم
1,00 EGPWelded wire mesh can be divided into 2 types according to different flexibility: welded mesh panel and welded mesh roll. Panel common size is 1800 mm × 3000 mm, we also accept other requirements.1*2m 1.25*2.5 1.5*3 Welded mesh roll has better flexibility. Welded wire mesh is made of low carbon steel wire, which has galvanized…
-
لوح شبك حديد 1*2 م سمك 3مم 20*20مم
1,00 EGPWelded wire mesh can be divided into 2 types according to different flexibility: welded mesh panel and welded mesh roll. Panel common size is 1800 mm × 3000 mm, we also accept other requirements.1*2m 1.25*2.5 1.5*3 Welded mesh roll has better flexibility. Welded wire mesh is made of low carbon steel wire, which has galvanized…
-
لوح شبك حديد 1*2 م سمك 3 مم 30*30مم
1,00 EGPWelded wire mesh can be divided into 2 types according to different flexibility: welded mesh panel and welded mesh roll. Panel common size is 1800 mm × 3000 mm, we also accept other requirements.1*2m 1.25*2.5 1.5*3 Welded mesh roll has better flexibility. Welded wire mesh is made of low carbon steel wire, which has galvanized…
-
لوح شبك حديد 1*2 م سمك 5 مم 60*60مم
1,00 EGPWelded wire mesh can be divided into 2 types according to different flexibility: welded mesh panel and welded mesh roll. Panel common size is 1800 mm × 3000 mm, we also accept other requirements.1*2m 1.25*2.5 1.5*3 Welded mesh roll has better flexibility. Welded wire mesh is made of low carbon steel wire, which has galvanized…
-
-
SHEET Hardox 500 6 MM 2×6m
245.760,00 EGPلوح هاردوكس 500 سمك 6 مم 2*6م
Hardox® 400 is an all-around steel that resists wear and abrasion with a nominal hardness of 400 HBW. Thanks to its high toughness, bendability and weldability, it’s well suited for equipment exposed to moderate wear applications
-
SHEET Hardox 500 12 MM 2×6m
322.560,00 EGPلوح هاردوكس 500 سمك 12مم 2*6م
Hardox® 500 is an all-around steel that resists wear and abrasion with a nominal hardness of 400 HBW. Thanks to its high toughness, bendability and weldability, it’s well suited for equipment exposed to moderate wear applications