Showing 17–32 of 75 resultsSorted by popularity
-
17.500,00 EGP
Globe valves are linear motion closing-down valves in which the closure member is moved squarely on and off the seat. Usually the closure member is referred as a disc, irrespective of its shape. The seat opening varies in direct proportion to the travel of the disc. This proportional relationship between valve opening and disc travel is ideally suited for duties involving regulation of flow rate. Globe valves are most suitable for throttling and controlling fluid flow and are generally employed in small size piping
-
3.225,00 EGP
Stainless Steel (316) Ball Valve – Full Port 1,000 PSI (WOG)Stainless Steel Ball Valve –
Full Port – 1,000 WOG (PSI) Heavy Duty For Water, Oil, And Gas With Blue Locking Handles, NPT
• S.S. 316 investment casting body
• Working Pressure of 1,000 PSI (WOG)
• Minimal pressure drop due to large full-size ports
• Suitable for full range of liquids and gas
• Temperature range: -60 to 450 Degrees F
• Low operation torque
• 100% individually tested
• Blowout-proof stem
• NPT threaded ends to ANSI B1.20.1
• Heavy duty locking handles with blue vinyl insulator
-
2.110,00 EGP
Stainless Steel (316) Ball Valve – Full Port 1,000 PSI (WOG)Stainless Steel Ball Valve –
Full Port – 1,000 WOG (PSI) Heavy Duty For Water, Oil, And Gas With Blue Locking Handles, NPT
• S.S. 316 investment casting body
• Working Pressure of 1,000 PSI (WOG)
• Minimal pressure drop due to large full-size ports
• Suitable for full range of liquids and gas
• Temperature range: -60 to 450 Degrees F
• Low operation torque
• 100% individually tested
• Blowout-proof stem
• NPT threaded ends to ANSI B1.20.1
• Heavy duty locking handles with blue vinyl insulator
-
1.650,00 EGP
Sampling valves are used in piping systems or on tanks for sampling. It can also be assembled at the bottom of the tank or pipeline for residue drain
تتوافر محابس جمع العينات التى تستخدم فى خطوط المواسير او التنكات لسحب العينات ويتم وضعها ايضا فى قاع
التنك او اخر الخط
-
8.350,00 EGP
Stainless Steel (316) Ball Valve – Full Port 1,000 PSI (WOG)Stainless Steel Ball Valve –
Full Port – 1,000 WOG (PSI) Heavy Duty For Water, Oil, And Gas With Blue Locking Handles, NPT
• S.S. 316 investment casting body
• Working Pressure of 1,000 PSI (WOG)
• Minimal pressure drop due to large full-size ports
• Suitable for full range of liquids and gas
• Temperature range: -60 to 450 Degrees F
• Low operation torque
• 100% individually tested
• Blowout-proof stem
• NPT threaded ends to ANSI B1.20.1
• Heavy duty locking handles with blue vinyl insulator
-
8.320,00 EGP
These cast iron butterfly valves are generally used within potable water and heating (cold and hot water) systems. The lug butterfly valves are also suitable for food and chemical industry. The seats are not suitable for mediums having abrasive property (acidity or alkaline property). Resistance to sunlight, weathering and ozone. Poor resistance to petroleum oils and fuel. Good heat and compression set resistance. Suitable for: Less than 10% acids, inorganic and organic alcohols, alkaline salts and solutions, dry bulk, hot-cold water, steam Not suitable for Hydrocarbons
-
8.320,00 EGP
These cast iron butterfly valves are generally used within potable water and heating (cold and hot water) systems. The lug butterfly valves are also suitable for food and chemical industry. The seats are not suitable for mediums having abrasive property (acidity or alkaline property). Resistance to sunlight, weathering and ozone. Poor resistance to petroleum oils and fuel. Good heat and compression set resistance. Suitable for: Less than 10% acids, inorganic and organic alcohols, alkaline salts and solutions, dry bulk, hot-cold water, steam Not suitable for Hydrocarbons
-
7.200,00 EGP
These cast iron butterfly valves are generally used within potable water and heating (cold and hot water) systems. The lug butterfly valves are also suitable for food and chemical industry. The seats are not suitable for mediums having abrasive property (acidity or alkaline property). Resistance to sunlight, weathering and ozone. Poor resistance to petroleum oils and fuel. Good heat and compression set resistance. Suitable for: Less than 10% acids, inorganic and organic alcohols, alkaline salts and solutions, dry bulk, hot-cold water, steam Not suitable for Hydrocarbons
-
-
500,00 EGP
Stainless Steel (316) Ball Valve – Full Port 1,000 PSI (WOG)Stainless Steel Ball Valve –
Full Port – 1,000 WOG (PSI) Heavy Duty For Water, Oil, And Gas With Blue Locking Handles, NPT
• S.S. 316 investment casting body
• Working Pressure of 1,000 PSI (WOG)
• Minimal pressure drop due to large full-size ports
• Suitable for full range of liquids and gas
• Temperature range: -60 to 450 Degrees F
• Low operation torque
• 100% individually tested
• Blowout-proof stem
• NPT threaded ends to ANSI B1.20.1
• Heavy duty locking handles with blue vinyl insulator
-
700,00 EGP
Stainless Steel (316) Ball Valve – Full Port 1,000 PSI (WOG)Stainless Steel Ball Valve –
Full Port – 1,000 WOG (PSI) Heavy Duty For Water, Oil, And Gas With Blue Locking Handles, NPT
• S.S. 316 investment casting body
• Working Pressure of 1,000 PSI (WOG)
• Minimal pressure drop due to large full-size ports
• Suitable for full range of liquids and gas
• Temperature range: -60 to 450 Degrees F
• Low operation torque
• 100% individually tested
• Blowout-proof stem
• NPT threaded ends to ANSI B1.20.1
• Heavy duty locking handles with blue vinyl insulator
-
-
17.500,00 EGP
Globe valves are linear motion closing-down valves in which the closure member is moved squarely on and off the seat. Usually the closure member is referred as a disc, irrespective of its shape. The seat opening varies in direct proportion to the travel of the disc. This proportional relationship between valve opening and disc travel is ideally suited for duties involving regulation of flow rate. Globe valves are most suitable for throttling and controlling fluid flow and are generally employed in small size piping
-
5.200,00 EGP
The butterfly valve with actuator is an efficient tool for automating any industrial process. The wide range of options, materials and configurations enable the butterfly valve to be controlled by a button and monitored live. The two common valve actuators are pneumatic and electric actuators. Actuators mounted on the butterfly valves are known as ‘rotary actuators’.
-
3.000,00 EGP
The butterfly valve with actuator is an efficient tool for automating any industrial process. The wide range of options, materials and configurations enable the butterfly valve to be controlled by a button and monitored live. The two common valve actuators are pneumatic and electric actuators. Actuators mounted on the butterfly valves are known as ‘rotary actuators’.
-
1.800,00 EGP
Sampling valves are used in piping systems or on tanks for sampling. It can also be assembled at the bottom of the tank or pipeline for residue drain
تتوافر محابس جمع العينات التى تستخدم فى خطوط المواسير او التنكات لسحب العينات ويتم وضعها ايضا فى قاع
التنك او اخر الخط
