30.00 EGP
مسمار انكور هيلتي استانلس 304 12*100مم
Wedge SS 304Anchor Bolt M12*100m
SKU: 5000مسمار تثبيت انكورهيلتي ويطلق عليه اكمون هيلتي وايضا انكور بولت
يتوافر منه مقاسات متنوعه استانلس 304-316
1.150.00 EGP
فلانشة304 استانلس8 بوصة سمك 15مم < 15× p> SS Flange 304 8 Inch
SKU: 014304F615-1فلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤
2.510.00 EGP
شيك بلف البان طبق (ويفر) مقاس 4 بوصة
SS Check Valve Wafer 4 Inch
SKU: N/Aشيك بلف البان طبق لو ويفر او مسمار يستخدم فى منتجات الالبان والاغذية والادوية والصناعات الكيماوية المختلفة
3.850.00 EGP
شيك بلف البان طبق (ويفر) مقاس 6 بوصة
SS Check Valve Wafer 6 Inch
SKU: N/Aشيك بلف البان طبق لو ويفر او مسمار يستخدم فى منتجات الالبان والاغذية والادوية والصناعات الكيماوية المختلفة
2.100.00 EGP
محبس عدم رجوع البان استانلس 316 مقاس 3بوصة
-SS Check Valve 316 3 inch
SKU: 014-304-3nrvView Product
3.600.00 EGP
“1 Pneumatic Stainless Steel Angle Seat Threaded End Valve
SKU: N/AStainless steel angle seat valves
View our wide range of stainless steel pneumatic angle seat valves. Angle seat valves are designed to have the valve seat placed at an angle in a Y-shape, which is advantageous because it allows the medium to flow through relatively easily (few bends) for minimal flow and pressure loss. They have better flow characteristics than vertical globe valves. It operates by having a spindle move in a linear motion by an air-operated piston to move the seal towards or away from the valve seat. This seal is usually PTFE (teflon) and the valve housing is stainless steel. Angle seat valves are reliable, durable, require low maintenance and are characterized by a long lifespan with millions of cycles. They can be used in applications for gases, vacuum or (viscous) liquids and offer a seal in both in and out directions. Other names for these valves are shut-off valves, Y-valves or angle seat piston valves. The valve generally closes in the same direction as the flow direction. There are special versions where the valve closes against the flow direction, in order to reduce the risk of water hammer.
1.150.00 EGP
فلانشة304 استانلس 6بوصة سمك 15مم < 15× p> SS Flange 304 6 Inch
SKU: 014304F615فلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤
550.00 EGP
فلانشة 304 استانلس استيل 4 بوصة سمك 10مم
304 SS Flange 4 Inch Thin 10 mm
SKU: 014304F415فلانشات استانلس استيل مواصفات مختلفة 304-316-321-310- استيراد وتصنيع عامية ومخرمة ومقلوظة وبرقبة وبشفة ومسلوبة ,وثابتة ومتحركة ….الخ باختلاف الجداول والضغوط والpn مقاسات من 3/8 بوصة الى 24 بوصة مع امكانية تصنيع وتخريم الفلانشات والطبب بمقاساتكم المختلفة من اي سمك بلازما او نظيفة بجودةعالية بمخارط وفرايز cnc
750.00 EGP
فلانشة 304 استانلس استيل 3 بوصة سمك 15مم
304 SS Flange 3Inch Thin 15mm
SKU: 014304F315فلانشة استانلس ٣٠٤ تصنيع محلي خامه اوروبيه امريكية او المانيه او هندية حسب المتوفر السمك ١٥ بالطلب ويوجد الي ٣٠مم واقل شيء بالطلب ٨مم او١٠ او١٢
19.740.00 EGP
فلانشة استانلس برقبة ٣١٦ ج ٤٠ مقاس ١٠ بوصة #٣٠٠
SS Flange Wn 316 #300 sch 40 10 inch
SKU: N/AWeld neck flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.
During a dimensional inspection of weld neck flange, you should check for
- Outer & Inner Diameter of body
- Bolt Circle & Bolt hole Diameter
- the thickness of weld end
- Length of the Hub and
- Straightness and alignment of the bolt hole
400.00 EGP
كوع البان لحام استانلس استيل 316 90°DN80
Stainless Sanitary Weld Elbow 90° DN80
SKU: 014-316EDn65Sanitary Weld Elbow
Sanitary Weld Elbow is in the process system to change the fluid direction, it is a very important sanitary fittings to the installation. Sanitary weld elbow is made in material stainless steel 304 and 316 or specified grade, with the advantage of high cleanliness surface and corrosion resistance. Wellgreen offers sanitary welding fittings through 1/2” to 12” with standard 3A, DIN, SMS, BS, ISO, IDF, DS, BPF, I-Line etc, also we are ability to offer customized weld elbow and bend.
725.00 EGP
لاكور البان 316DN80
Stainless Sanitary Union DN80 316
SKU: U-014-316Dn80Sanitary DIN Union Fittings
Sanitary DIN Union Fittings are fabricated complying with DIN 11851 standard. Consisting of a round Slotted Nut, a Weld liner and Weld Male, and a o-ring seal. Wellgreen sanitary offers DIN sanitary union fittings assembling with different types
|
DIMENSION |
DN10 – DN150 |
|---|---|
|
MATERIAL |
T304, T316L, 1.4301, 1.4404 |
|
STANDARD |
DIN 11851 |
|
SEALING GASKET |
Silicone, EPDM, PTFE, Buna-N etc. |
|
TEMPERATURE |
-30°C / -22°F up to +120°C/ +248°F |
|
APPLICATION |
Pharmacy, Beer, Food, Petroleum, Dairy, Beverage,Biotech ,Cosmetics etc. |
30.00 EGP
نبل مسدس قلاووظ استانلس 304 1/4 بوصة
S.S304 Hexagon Nipple 1/4
SKU: Hex N-014-304-1/4We stock multiple sizes of stainless steel hex nipples.
We offer stainless steel hex nipples in 304 stainless steel and 316 stainless steel. Hex Nipples are NPT x NPT with a hex nut in the middle. NPT Threads conform to ASME B1.20.1.
Sizes: 1/8″ – 4″
Grades: 304 – 316
450.00 EGP
تية البان لحام 316DN80
316 Sanitary Weld Tee DN80
SKU: T-014-316Dn80Sanitary Weld Tee
Sanitary Weld Tee Fittings includes reducing and equal tees, it is 3 ways ends sanitary fittings which with butt weld connected. Wellgreen offers sanitary butt weld fittings through 1/2” to 12” with standard 3A, DIN, SMS, BS, ISO, IDF, DS, BPF, I-Line etc,
| Application | Food, Brewery, Beverage, Dairy, Pharmaceutical, Fine chemical, Cosmetic etc. |
|---|
75.00 EGP
قفيز ماسورة مدور 2بوصة 304 بالمسمار
Sanitary S.S 2 Inch 304 Round Oval Tube Hanger Bolt Pipe HolderSKU: 014-304-85-1|
Sanitary Stainless Steel Pipe Holder
|
|||
|
Body Material
|
AISI 304 /
|
||
|
Available Size
|
1″ ~ 12″
|
||
|
Type
|
Round / Hexagon / Oval
|
||
|
Fastener
|
Bolt
|
||
|
Round Diameter
|
12.7mm ~ 304mm
|
||
|
Application
|
Stainless Steel Pipe System
|
||
90.00 EGP
قفيز ماسورة مدور 85مم 304 بالمسمار Sanitary S.S Round Oval Tube Hanger Bolt Type Pipe Holder
SKU: 014-304-85|
Sanitary Stainless Steel Pipe Holder
|
|||
|
Body Material
|
AISI 304 /
|
||
|
Available Size
|
1″ ~ 12″
|
||
|
Type
|
Round / Hexagon / Oval
|
||
|
Fastener
|
Bolt
|
||
|
Round Diameter
|
12.7mm ~ 304mm
|
||
|
Application
|
Stainless Steel Pipe System
|
||
525.00 EGP
لاكور البان 304DN65
Stainless Sanitary Union DN65 304
SKU: U-014-304Dn65-Sanitary DIN Union Fittings
Sanitary DIN Union Fittings are fabricated complying with DIN 11851 standard. Consisting of a round Slotted Nut, a Weld liner and Weld Male, and a o-ring seal. Wellgreen sanitary offers DIN sanitary union fittings assembling with different types
|
DIMENSION |
DN10 – DN150 |
|---|---|
|
MATERIAL |
T304, T316L, 1.4301, 1.4404 |
|
STANDARD |
DIN 11851 |
|
SEALING GASKET |
Silicone, EPDM, PTFE, Buna-N etc. |
|
TEMPERATURE |
-30°C / -22°F up to +120°C/ +248°F |
|
APPLICATION |
Pharmacy, Beer, Food, Petroleum, Dairy, Beverage,Biotech ,Cosmetics etc. |
250.00 EGP
كوع البان لحام استانلس استيل 316 90°DN65
Stainless Sanitary Weld Elbow 90° DN65
SKU: E-014-316Dn65Sanitary Weld Elbow
Sanitary Weld Elbow is in the process system to change the fluid direction, it is a very important sanitary fittings to the installation. Sanitary weld elbow is made in material stainless steel 304 and 316 or specified grade, with the advantage of high cleanliness surface and corrosion resistance. Wellgreen offers sanitary welding fittings through 1/2” to 12” with standard 3A, DIN, SMS, BS, ISO, IDF, DS, BPF, I-Line etc, also we are ability to offer customized weld elbow and bend.
|
Size |
D |
L |
R |
|
DN10 |
12 |
26 |
26 |
|
DN15 |
18 |
35 |
35 |
|
DN20 |
22 |
40 |
40 |
|
DN25 |
28 |
50 |
50 |
|
DN32 |
34 |
55 |
55 |
|
DN40 |
40 |
60 |
60 |
|
DN50 |
52 |
70 |
70 |
|
DN65 |
70 |
80 |
80 |
|
DN80 |
85 |
90 |
90 |
|
DN100 |
104 |
100 |
100 |
|
DN125 |
129 |
187 |
187 |
|
DN150 |
154 |
225 |
225 |
|
DN200 |
204 |
300 |
300 |
مسمار انكور هيلتي استانلس 304 12*100مم
Wedge SS 304Anchor Bolt M12*100m
مسمار تثبيت انكورهيلتي ويطلق عليه اكمون هيلتي وايضا انكور بولت
يتوافر منه مقاسات متنوعه استانلس 304-316
فلانشة304 استانلس8 بوصة سمك 15مم < 15× p> SS Flange 304 8 Inch
فلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤
شيك بلف البان طبق (ويفر) مقاس 4 بوصة
SS Check Valve Wafer 4 Inch
شيك بلف البان طبق لو ويفر او مسمار يستخدم فى منتجات الالبان والاغذية والادوية والصناعات الكيماوية المختلفة
شيك بلف البان طبق (ويفر) مقاس 6 بوصة
SS Check Valve Wafer 6 Inch
شيك بلف البان طبق لو ويفر او مسمار يستخدم فى منتجات الالبان والاغذية والادوية والصناعات الكيماوية المختلفة
“1 Pneumatic Stainless Steel Angle Seat Threaded End Valve
Stainless steel angle seat valves
View our wide range of stainless steel pneumatic angle seat valves. Angle seat valves are designed to have the valve seat placed at an angle in a Y-shape, which is advantageous because it allows the medium to flow through relatively easily (few bends) for minimal flow and pressure loss. They have better flow characteristics than vertical globe valves. It operates by having a spindle move in a linear motion by an air-operated piston to move the seal towards or away from the valve seat. This seal is usually PTFE (teflon) and the valve housing is stainless steel. Angle seat valves are reliable, durable, require low maintenance and are characterized by a long lifespan with millions of cycles. They can be used in applications for gases, vacuum or (viscous) liquids and offer a seal in both in and out directions. Other names for these valves are shut-off valves, Y-valves or angle seat piston valves. The valve generally closes in the same direction as the flow direction. There are special versions where the valve closes against the flow direction, in order to reduce the risk of water hammer.
فلانشة304 استانلس 6بوصة سمك 15مم < 15× p> SS Flange 304 6 Inch
فلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤
فلانشة 304 استانلس استيل 4 بوصة سمك 10مم
304 SS Flange 4 Inch Thin 10 mm
فلانشات استانلس استيل مواصفات مختلفة 304-316-321-310- استيراد وتصنيع عامية ومخرمة ومقلوظة وبرقبة وبشفة ومسلوبة ,وثابتة ومتحركة ….الخ باختلاف الجداول والضغوط والpn مقاسات من 3/8 بوصة الى 24 بوصة مع امكانية تصنيع وتخريم الفلانشات والطبب بمقاساتكم المختلفة من اي سمك بلازما او نظيفة بجودةعالية بمخارط وفرايز cnc
فلانشة 304 استانلس استيل 3 بوصة سمك 15مم
304 SS Flange 3Inch Thin 15mm
فلانشة استانلس ٣٠٤ تصنيع محلي خامه اوروبيه امريكية او المانيه او هندية حسب المتوفر السمك ١٥ بالطلب ويوجد الي ٣٠مم واقل شيء بالطلب ٨مم او١٠ او١٢
فلانشة استانلس برقبة ٣١٦ ج ٤٠ مقاس ١٠ بوصة #٣٠٠
SS Flange Wn 316 #300 sch 40 10 inch
Weld neck flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.
During a dimensional inspection of weld neck flange, you should check for
- Outer & Inner Diameter of body
- Bolt Circle & Bolt hole Diameter
- the thickness of weld end
- Length of the Hub and
- Straightness and alignment of the bolt hole
كوع البان لحام استانلس استيل 316 90°DN80
Stainless Sanitary Weld Elbow 90° DN80
Sanitary Weld Elbow
Sanitary Weld Elbow is in the process system to change the fluid direction, it is a very important sanitary fittings to the installation. Sanitary weld elbow is made in material stainless steel 304 and 316 or specified grade, with the advantage of high cleanliness surface and corrosion resistance. Wellgreen offers sanitary welding fittings through 1/2” to 12” with standard 3A, DIN, SMS, BS, ISO, IDF, DS, BPF, I-Line etc, also we are ability to offer customized weld elbow and bend.
لاكور البان 316DN80
Stainless Sanitary Union DN80 316
Sanitary DIN Union Fittings
Sanitary DIN Union Fittings are fabricated complying with DIN 11851 standard. Consisting of a round Slotted Nut, a Weld liner and Weld Male, and a o-ring seal. Wellgreen sanitary offers DIN sanitary union fittings assembling with different types
|
DIMENSION |
DN10 – DN150 |
|---|---|
|
MATERIAL |
T304, T316L, 1.4301, 1.4404 |
|
STANDARD |
DIN 11851 |
|
SEALING GASKET |
Silicone, EPDM, PTFE, Buna-N etc. |
|
TEMPERATURE |
-30°C / -22°F up to +120°C/ +248°F |
|
APPLICATION |
Pharmacy, Beer, Food, Petroleum, Dairy, Beverage,Biotech ,Cosmetics etc. |
نبل مسدس قلاووظ استانلس 304 1/4 بوصة
S.S304 Hexagon Nipple 1/4
We stock multiple sizes of stainless steel hex nipples.
We offer stainless steel hex nipples in 304 stainless steel and 316 stainless steel. Hex Nipples are NPT x NPT with a hex nut in the middle. NPT Threads conform to ASME B1.20.1.
Sizes: 1/8″ – 4″
Grades: 304 – 316
تية البان لحام 316DN80
316 Sanitary Weld Tee DN80
Sanitary Weld Tee
Sanitary Weld Tee Fittings includes reducing and equal tees, it is 3 ways ends sanitary fittings which with butt weld connected. Wellgreen offers sanitary butt weld fittings through 1/2” to 12” with standard 3A, DIN, SMS, BS, ISO, IDF, DS, BPF, I-Line etc,
| Application | Food, Brewery, Beverage, Dairy, Pharmaceutical, Fine chemical, Cosmetic etc. |
|---|
قفيز ماسورة مدور 2بوصة 304 بالمسمار
Sanitary S.S 2 Inch 304 Round Oval Tube Hanger Bolt Pipe Holder|
Sanitary Stainless Steel Pipe Holder
|
|||
|
Body Material
|
AISI 304 /
|
||
|
Available Size
|
1″ ~ 12″
|
||
|
Type
|
Round / Hexagon / Oval
|
||
|
Fastener
|
Bolt
|
||
|
Round Diameter
|
12.7mm ~ 304mm
|
||
|
Application
|
Stainless Steel Pipe System
|
||
قفيز ماسورة مدور 85مم 304 بالمسمار Sanitary S.S Round Oval Tube Hanger Bolt Type Pipe Holder
|
Sanitary Stainless Steel Pipe Holder
|
|||
|
Body Material
|
AISI 304 /
|
||
|
Available Size
|
1″ ~ 12″
|
||
|
Type
|
Round / Hexagon / Oval
|
||
|
Fastener
|
Bolt
|
||
|
Round Diameter
|
12.7mm ~ 304mm
|
||
|
Application
|
Stainless Steel Pipe System
|
||
لاكور البان 304DN65
Stainless Sanitary Union DN65 304
Sanitary DIN Union Fittings
Sanitary DIN Union Fittings are fabricated complying with DIN 11851 standard. Consisting of a round Slotted Nut, a Weld liner and Weld Male, and a o-ring seal. Wellgreen sanitary offers DIN sanitary union fittings assembling with different types
|
DIMENSION |
DN10 – DN150 |
|---|---|
|
MATERIAL |
T304, T316L, 1.4301, 1.4404 |
|
STANDARD |
DIN 11851 |
|
SEALING GASKET |
Silicone, EPDM, PTFE, Buna-N etc. |
|
TEMPERATURE |
-30°C / -22°F up to +120°C/ +248°F |
|
APPLICATION |
Pharmacy, Beer, Food, Petroleum, Dairy, Beverage,Biotech ,Cosmetics etc. |
كوع البان لحام استانلس استيل 316 90°DN65
Stainless Sanitary Weld Elbow 90° DN65
Sanitary Weld Elbow
Sanitary Weld Elbow is in the process system to change the fluid direction, it is a very important sanitary fittings to the installation. Sanitary weld elbow is made in material stainless steel 304 and 316 or specified grade, with the advantage of high cleanliness surface and corrosion resistance. Wellgreen offers sanitary welding fittings through 1/2” to 12” with standard 3A, DIN, SMS, BS, ISO, IDF, DS, BPF, I-Line etc, also we are ability to offer customized weld elbow and bend.
|
Size |
D |
L |
R |
|
DN10 |
12 |
26 |
26 |
|
DN15 |
18 |
35 |
35 |
|
DN20 |
22 |
40 |
40 |
|
DN25 |
28 |
50 |
50 |
|
DN32 |
34 |
55 |
55 |
|
DN40 |
40 |
60 |
60 |
|
DN50 |
52 |
70 |
70 |
|
DN65 |
70 |
80 |
80 |
|
DN80 |
85 |
90 |
90 |
|
DN100 |
104 |
100 |
100 |
|
DN125 |
129 |
187 |
187 |
|
DN150 |
154 |
225 |
225 |
|
DN200 |
204 |
300 |
300 |
مسمار انكور هيلتي استانلس 304 12*100مم
Wedge SS 304Anchor Bolt M12*100m
مسمار تثبيت انكورهيلتي ويطلق عليه اكمون هيلتي وايضا انكور بولت
يتوافر منه مقاسات متنوعه استانلس 304-316
فلانشة304 استانلس8 بوصة سمك 15مم < 15× p> SS Flange 304 8 Inch
فلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤
شيك بلف البان طبق (ويفر) مقاس 4 بوصة
SS Check Valve Wafer 4 Inch
شيك بلف البان طبق لو ويفر او مسمار يستخدم فى منتجات الالبان والاغذية والادوية والصناعات الكيماوية المختلفة
شيك بلف البان طبق (ويفر) مقاس 6 بوصة
SS Check Valve Wafer 6 Inch
شيك بلف البان طبق لو ويفر او مسمار يستخدم فى منتجات الالبان والاغذية والادوية والصناعات الكيماوية المختلفة
“1 Pneumatic Stainless Steel Angle Seat Threaded End Valve
Stainless steel angle seat valves
View our wide range of stainless steel pneumatic angle seat valves. Angle seat valves are designed to have the valve seat placed at an angle in a Y-shape, which is advantageous because it allows the medium to flow through relatively easily (few bends) for minimal flow and pressure loss. They have better flow characteristics than vertical globe valves. It operates by having a spindle move in a linear motion by an air-operated piston to move the seal towards or away from the valve seat. This seal is usually PTFE (teflon) and the valve housing is stainless steel. Angle seat valves are reliable, durable, require low maintenance and are characterized by a long lifespan with millions of cycles. They can be used in applications for gases, vacuum or (viscous) liquids and offer a seal in both in and out directions. Other names for these valves are shut-off valves, Y-valves or angle seat piston valves. The valve generally closes in the same direction as the flow direction. There are special versions where the valve closes against the flow direction, in order to reduce the risk of water hammer.
فلانشة304 استانلس 6بوصة سمك 15مم < 15× p> SS Flange 304 6 Inch
فلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤
فلانشة 304 استانلس استيل 4 بوصة سمك 10مم
304 SS Flange 4 Inch Thin 10 mm
فلانشات استانلس استيل مواصفات مختلفة 304-316-321-310- استيراد وتصنيع عامية ومخرمة ومقلوظة وبرقبة وبشفة ومسلوبة ,وثابتة ومتحركة ….الخ باختلاف الجداول والضغوط والpn مقاسات من 3/8 بوصة الى 24 بوصة مع امكانية تصنيع وتخريم الفلانشات والطبب بمقاساتكم المختلفة من اي سمك بلازما او نظيفة بجودةعالية بمخارط وفرايز cnc
فلانشة 304 استانلس استيل 3 بوصة سمك 15مم
304 SS Flange 3Inch Thin 15mm
فلانشة استانلس ٣٠٤ تصنيع محلي خامه اوروبيه امريكية او المانيه او هندية حسب المتوفر السمك ١٥ بالطلب ويوجد الي ٣٠مم واقل شيء بالطلب ٨مم او١٠ او١٢
فلانشة استانلس برقبة ٣١٦ ج ٤٠ مقاس ١٠ بوصة #٣٠٠
SS Flange Wn 316 #300 sch 40 10 inch
Weld neck flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.
During a dimensional inspection of weld neck flange, you should check for
- Outer & Inner Diameter of body
- Bolt Circle & Bolt hole Diameter
- the thickness of weld end
- Length of the Hub and
- Straightness and alignment of the bolt hole
كوع البان لحام استانلس استيل 316 90°DN80
Stainless Sanitary Weld Elbow 90° DN80
Sanitary Weld Elbow
Sanitary Weld Elbow is in the process system to change the fluid direction, it is a very important sanitary fittings to the installation. Sanitary weld elbow is made in material stainless steel 304 and 316 or specified grade, with the advantage of high cleanliness surface and corrosion resistance. Wellgreen offers sanitary welding fittings through 1/2” to 12” with standard 3A, DIN, SMS, BS, ISO, IDF, DS, BPF, I-Line etc, also we are ability to offer customized weld elbow and bend.
لاكور البان 316DN80
Stainless Sanitary Union DN80 316
Sanitary DIN Union Fittings
Sanitary DIN Union Fittings are fabricated complying with DIN 11851 standard. Consisting of a round Slotted Nut, a Weld liner and Weld Male, and a o-ring seal. Wellgreen sanitary offers DIN sanitary union fittings assembling with different types
|
DIMENSION |
DN10 – DN150 |
|---|---|
|
MATERIAL |
T304, T316L, 1.4301, 1.4404 |
|
STANDARD |
DIN 11851 |
|
SEALING GASKET |
Silicone, EPDM, PTFE, Buna-N etc. |
|
TEMPERATURE |
-30°C / -22°F up to +120°C/ +248°F |
|
APPLICATION |
Pharmacy, Beer, Food, Petroleum, Dairy, Beverage,Biotech ,Cosmetics etc. |
نبل مسدس قلاووظ استانلس 304 1/4 بوصة
S.S304 Hexagon Nipple 1/4
We stock multiple sizes of stainless steel hex nipples.
We offer stainless steel hex nipples in 304 stainless steel and 316 stainless steel. Hex Nipples are NPT x NPT with a hex nut in the middle. NPT Threads conform to ASME B1.20.1.
Sizes: 1/8″ – 4″
Grades: 304 – 316
تية البان لحام 316DN80
316 Sanitary Weld Tee DN80
Sanitary Weld Tee
Sanitary Weld Tee Fittings includes reducing and equal tees, it is 3 ways ends sanitary fittings which with butt weld connected. Wellgreen offers sanitary butt weld fittings through 1/2” to 12” with standard 3A, DIN, SMS, BS, ISO, IDF, DS, BPF, I-Line etc,
| Application | Food, Brewery, Beverage, Dairy, Pharmaceutical, Fine chemical, Cosmetic etc. |
|---|
قفيز ماسورة مدور 2بوصة 304 بالمسمار
Sanitary S.S 2 Inch 304 Round Oval Tube Hanger Bolt Pipe Holder|
Sanitary Stainless Steel Pipe Holder
|
|||
|
Body Material
|
AISI 304 /
|
||
|
Available Size
|
1″ ~ 12″
|
||
|
Type
|
Round / Hexagon / Oval
|
||
|
Fastener
|
Bolt
|
||
|
Round Diameter
|
12.7mm ~ 304mm
|
||
|
Application
|
Stainless Steel Pipe System
|
||
قفيز ماسورة مدور 85مم 304 بالمسمار Sanitary S.S Round Oval Tube Hanger Bolt Type Pipe Holder
|
Sanitary Stainless Steel Pipe Holder
|
|||
|
Body Material
|
AISI 304 /
|
||
|
Available Size
|
1″ ~ 12″
|
||
|
Type
|
Round / Hexagon / Oval
|
||
|
Fastener
|
Bolt
|
||
|
Round Diameter
|
12.7mm ~ 304mm
|
||
|
Application
|
Stainless Steel Pipe System
|
||
لاكور البان 304DN65
Stainless Sanitary Union DN65 304
Sanitary DIN Union Fittings
Sanitary DIN Union Fittings are fabricated complying with DIN 11851 standard. Consisting of a round Slotted Nut, a Weld liner and Weld Male, and a o-ring seal. Wellgreen sanitary offers DIN sanitary union fittings assembling with different types
|
DIMENSION |
DN10 – DN150 |
|---|---|
|
MATERIAL |
T304, T316L, 1.4301, 1.4404 |
|
STANDARD |
DIN 11851 |
|
SEALING GASKET |
Silicone, EPDM, PTFE, Buna-N etc. |
|
TEMPERATURE |
-30°C / -22°F up to +120°C/ +248°F |
|
APPLICATION |
Pharmacy, Beer, Food, Petroleum, Dairy, Beverage,Biotech ,Cosmetics etc. |
كوع البان لحام استانلس استيل 316 90°DN65
Stainless Sanitary Weld Elbow 90° DN65
Sanitary Weld Elbow
Sanitary Weld Elbow is in the process system to change the fluid direction, it is a very important sanitary fittings to the installation. Sanitary weld elbow is made in material stainless steel 304 and 316 or specified grade, with the advantage of high cleanliness surface and corrosion resistance. Wellgreen offers sanitary welding fittings through 1/2” to 12” with standard 3A, DIN, SMS, BS, ISO, IDF, DS, BPF, I-Line etc, also we are ability to offer customized weld elbow and bend.
|
Size |
D |
L |
R |
|
DN10 |
12 |
26 |
26 |
|
DN15 |
18 |
35 |
35 |
|
DN20 |
22 |
40 |
40 |
|
DN25 |
28 |
50 |
50 |
|
DN32 |
34 |
55 |
55 |
|
DN40 |
40 |
60 |
60 |
|
DN50 |
52 |
70 |
70 |
|
DN65 |
70 |
80 |
80 |
|
DN80 |
85 |
90 |
90 |
|
DN100 |
104 |
100 |
100 |
|
DN125 |
129 |
187 |
187 |
|
DN150 |
154 |
225 |
225 |
|
DN200 |
204 |
300 |
300 |
مسمار انكور هيلتي استانلس 304 12*100مم
Wedge SS 304Anchor Bolt M12*100m
مسمار تثبيت انكورهيلتي ويطلق عليه اكمون هيلتي وايضا انكور بولت
يتوافر منه مقاسات متنوعه استانلس 304-316
فلانشة304 استانلس8 بوصة سمك 15مم < 15× p> SS Flange 304 8 Inch
فلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤
شيك بلف البان طبق (ويفر) مقاس 4 بوصة
SS Check Valve Wafer 4 Inch
شيك بلف البان طبق لو ويفر او مسمار يستخدم فى منتجات الالبان والاغذية والادوية والصناعات الكيماوية المختلفة
شيك بلف البان طبق (ويفر) مقاس 6 بوصة
SS Check Valve Wafer 6 Inch
شيك بلف البان طبق لو ويفر او مسمار يستخدم فى منتجات الالبان والاغذية والادوية والصناعات الكيماوية المختلفة
“1 Pneumatic Stainless Steel Angle Seat Threaded End Valve
Stainless steel angle seat valves
View our wide range of stainless steel pneumatic angle seat valves. Angle seat valves are designed to have the valve seat placed at an angle in a Y-shape, which is advantageous because it allows the medium to flow through relatively easily (few bends) for minimal flow and pressure loss. They have better flow characteristics than vertical globe valves. It operates by having a spindle move in a linear motion by an air-operated piston to move the seal towards or away from the valve seat. This seal is usually PTFE (teflon) and the valve housing is stainless steel. Angle seat valves are reliable, durable, require low maintenance and are characterized by a long lifespan with millions of cycles. They can be used in applications for gases, vacuum or (viscous) liquids and offer a seal in both in and out directions. Other names for these valves are shut-off valves, Y-valves or angle seat piston valves. The valve generally closes in the same direction as the flow direction. There are special versions where the valve closes against the flow direction, in order to reduce the risk of water hammer.
فلانشة304 استانلس 6بوصة سمك 15مم < 15× p> SS Flange 304 6 Inch
فلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤
فلانشة 304 استانلس استيل 4 بوصة سمك 10مم
304 SS Flange 4 Inch Thin 10 mm
فلانشات استانلس استيل مواصفات مختلفة 304-316-321-310- استيراد وتصنيع عامية ومخرمة ومقلوظة وبرقبة وبشفة ومسلوبة ,وثابتة ومتحركة ….الخ باختلاف الجداول والضغوط والpn مقاسات من 3/8 بوصة الى 24 بوصة مع امكانية تصنيع وتخريم الفلانشات والطبب بمقاساتكم المختلفة من اي سمك بلازما او نظيفة بجودةعالية بمخارط وفرايز cnc
فلانشة 304 استانلس استيل 3 بوصة سمك 15مم
304 SS Flange 3Inch Thin 15mm
فلانشة استانلس ٣٠٤ تصنيع محلي خامه اوروبيه امريكية او المانيه او هندية حسب المتوفر السمك ١٥ بالطلب ويوجد الي ٣٠مم واقل شيء بالطلب ٨مم او١٠ او١٢
فلانشة استانلس برقبة ٣١٦ ج ٤٠ مقاس ١٠ بوصة #٣٠٠
SS Flange Wn 316 #300 sch 40 10 inch
Weld neck flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.
During a dimensional inspection of weld neck flange, you should check for
- Outer & Inner Diameter of body
- Bolt Circle & Bolt hole Diameter
- the thickness of weld end
- Length of the Hub and
- Straightness and alignment of the bolt hole
كوع البان لحام استانلس استيل 316 90°DN80
Stainless Sanitary Weld Elbow 90° DN80
Sanitary Weld Elbow
Sanitary Weld Elbow is in the process system to change the fluid direction, it is a very important sanitary fittings to the installation. Sanitary weld elbow is made in material stainless steel 304 and 316 or specified grade, with the advantage of high cleanliness surface and corrosion resistance. Wellgreen offers sanitary welding fittings through 1/2” to 12” with standard 3A, DIN, SMS, BS, ISO, IDF, DS, BPF, I-Line etc, also we are ability to offer customized weld elbow and bend.
لاكور البان 316DN80
Stainless Sanitary Union DN80 316
Sanitary DIN Union Fittings
Sanitary DIN Union Fittings are fabricated complying with DIN 11851 standard. Consisting of a round Slotted Nut, a Weld liner and Weld Male, and a o-ring seal. Wellgreen sanitary offers DIN sanitary union fittings assembling with different types
|
DIMENSION |
DN10 – DN150 |
|---|---|
|
MATERIAL |
T304, T316L, 1.4301, 1.4404 |
|
STANDARD |
DIN 11851 |
|
SEALING GASKET |
Silicone, EPDM, PTFE, Buna-N etc. |
|
TEMPERATURE |
-30°C / -22°F up to +120°C/ +248°F |
|
APPLICATION |
Pharmacy, Beer, Food, Petroleum, Dairy, Beverage,Biotech ,Cosmetics etc. |
نبل مسدس قلاووظ استانلس 304 1/4 بوصة
S.S304 Hexagon Nipple 1/4
We stock multiple sizes of stainless steel hex nipples.
We offer stainless steel hex nipples in 304 stainless steel and 316 stainless steel. Hex Nipples are NPT x NPT with a hex nut in the middle. NPT Threads conform to ASME B1.20.1.
Sizes: 1/8″ – 4″
Grades: 304 – 316
تية البان لحام 316DN80
316 Sanitary Weld Tee DN80
Sanitary Weld Tee
Sanitary Weld Tee Fittings includes reducing and equal tees, it is 3 ways ends sanitary fittings which with butt weld connected. Wellgreen offers sanitary butt weld fittings through 1/2” to 12” with standard 3A, DIN, SMS, BS, ISO, IDF, DS, BPF, I-Line etc,
| Application | Food, Brewery, Beverage, Dairy, Pharmaceutical, Fine chemical, Cosmetic etc. |
|---|
قفيز ماسورة مدور 2بوصة 304 بالمسمار
Sanitary S.S 2 Inch 304 Round Oval Tube Hanger Bolt Pipe Holder|
Sanitary Stainless Steel Pipe Holder
|
|||
|
Body Material
|
AISI 304 /
|
||
|
Available Size
|
1″ ~ 12″
|
||
|
Type
|
Round / Hexagon / Oval
|
||
|
Fastener
|
Bolt
|
||
|
Round Diameter
|
12.7mm ~ 304mm
|
||
|
Application
|
Stainless Steel Pipe System
|
||
قفيز ماسورة مدور 85مم 304 بالمسمار Sanitary S.S Round Oval Tube Hanger Bolt Type Pipe Holder
|
Sanitary Stainless Steel Pipe Holder
|
|||
|
Body Material
|
AISI 304 /
|
||
|
Available Size
|
1″ ~ 12″
|
||
|
Type
|
Round / Hexagon / Oval
|
||
|
Fastener
|
Bolt
|
||
|
Round Diameter
|
12.7mm ~ 304mm
|
||
|
Application
|
Stainless Steel Pipe System
|
||
لاكور البان 304DN65
Stainless Sanitary Union DN65 304
Sanitary DIN Union Fittings
Sanitary DIN Union Fittings are fabricated complying with DIN 11851 standard. Consisting of a round Slotted Nut, a Weld liner and Weld Male, and a o-ring seal. Wellgreen sanitary offers DIN sanitary union fittings assembling with different types
|
DIMENSION |
DN10 – DN150 |
|---|---|
|
MATERIAL |
T304, T316L, 1.4301, 1.4404 |
|
STANDARD |
DIN 11851 |
|
SEALING GASKET |
Silicone, EPDM, PTFE, Buna-N etc. |
|
TEMPERATURE |
-30°C / -22°F up to +120°C/ +248°F |
|
APPLICATION |
Pharmacy, Beer, Food, Petroleum, Dairy, Beverage,Biotech ,Cosmetics etc. |
كوع البان لحام استانلس استيل 316 90°DN65
Stainless Sanitary Weld Elbow 90° DN65
Sanitary Weld Elbow
Sanitary Weld Elbow is in the process system to change the fluid direction, it is a very important sanitary fittings to the installation. Sanitary weld elbow is made in material stainless steel 304 and 316 or specified grade, with the advantage of high cleanliness surface and corrosion resistance. Wellgreen offers sanitary welding fittings through 1/2” to 12” with standard 3A, DIN, SMS, BS, ISO, IDF, DS, BPF, I-Line etc, also we are ability to offer customized weld elbow and bend.
|
Size |
D |
L |
R |
|
DN10 |
12 |
26 |
26 |
|
DN15 |
18 |
35 |
35 |
|
DN20 |
22 |
40 |
40 |
|
DN25 |
28 |
50 |
50 |
|
DN32 |
34 |
55 |
55 |
|
DN40 |
40 |
60 |
60 |
|
DN50 |
52 |
70 |
70 |
|
DN65 |
70 |
80 |
80 |
|
DN80 |
85 |
90 |
90 |
|
DN100 |
104 |
100 |
100 |
|
DN125 |
129 |
187 |
187 |
|
DN150 |
154 |
225 |
225 |
|
DN200 |
204 |
300 |
300 |
