SPECIFICATIONS:

ASTM A36 Steel, Hot Rolled

FINISH:

Blue / Gray, slightly grainy

CHARACTERISTICS:

Welding = Excellent
Machining / Grinding = Good
Bending / Forming = Fair
Wear Resistance = Fair
Corrosion Resistance = Poor

MECHANICAL PROPERTIES:

Yield Point = 36,000 psi
Tensile Strength = 58,000 psi
Elongation = 20% in 2″
Brinell Hardness = 133; Melting Point = 2600F
*Data provided for reference only

HOW TO MEASURE:

Leg (A) X Leg (B) X Thickness (C) X Length

ظهرت المقالة Steel A36 Angle 50*50*5 mm <p/>– زوايا 36 حديد 50*50*5 طول 6مترmm أولاً على السبتية استيل لتجارة المعادن.

ظهرت المقالة SHEET Spring Steel 1 MM 25 cm×3 m <p> شريحة صلب سوستة سمك 1مم 25سم*3 م أولاً على السبتية استيل لتجارة المعادن.

ظهرت المقالة SHEET Spring Steel 0.7 MM 25 cm×2 m <p> شريحة صلب سوستة سمك 0.7 مم 25سم*2 م أولاً على السبتية استيل لتجارة المعادن.

The wedge anchor bolts, concrete cavity depth and no higher cleanliness requirements, easy to install and inexpensive. Jacking by selecting the appropriate thickness of the buried depth, with the increase of buried depth, tension increased after the products are reliable and expandable functionality. Body material: stainless steel, carbon steel and other metal materials. Also known as through bolts, expansion bolts and expansion anchors, which is designed for consistent performance in concrete.

There has three kinds of wedge anchors: fully threaded, partial threaded and the full-bodied wedge anchor. Wedge anchor can be hammered below the surface of the concrete while no longer needed. Anchor diameter equals drill hole size. The expansion clip is formed around anchor, providing full expansion for dependable,superior supporting power. Expanding clip will not fall off or twist in the hole. Each wedge anchor has a minimum embedment requirement. The anchor diameteris the same as the drill hole size.

Widely used in securing the through objects’ fastening, such as equipment,channel steel, guide rail, holder, steel structure, escalator, handrail and curtain wall etc. Every wedge anchor can be suitable for the standard anchorage depth, and also fit for shallow mining depth, to provide supreme flexibility for installation. Moreover the long thread offering the spacing installaiton, and can be flexibly adjustable to easy the installation.

ظهرت المقالة مسمار انكور هيلتي استانلس 304 12*120مم <p> Wedge SS 304Anchor Bolt M12*120m أولاً على السبتية استيل لتجارة المعادن.

The wedge anchor bolts, concrete cavity depth and no higher cleanliness requirements, easy to install and inexpensive. Jacking by selecting the appropriate thickness of the buried depth, with the increase of buried depth, tension increased after the products are reliable and expandable functionality. Body material: stainless steel, carbon steel and other metal materials. Also known as through bolts, expansion bolts and expansion anchors, which is designed for consistent performance in concrete.

There has three kinds of wedge anchors: fully threaded, partial threaded and the full-bodied wedge anchor. Wedge anchor can be hammered below the surface of the concrete while no longer needed. Anchor diameter equals drill hole size. The expansion clip is formed around anchor, providing full expansion for dependable,superior supporting power. Expanding clip will not fall off or twist in the hole. Each wedge anchor has a minimum embedment requirement. The anchor diameteris the same as the drill hole size.

Widely used in securing the through objects’ fastening, such as equipment,channel steel, guide rail, holder, steel structure, escalator, handrail and curtain wall etc. Every wedge anchor can be suitable for the standard anchorage depth, and also fit for shallow mining depth, to provide supreme flexibility for installation. Moreover the long thread offering the spacing installaiton, and can be flexibly adjustable to easy the installation.

ظهرت المقالة مسمار انكور هيلتي حديد 16*120مم <p> Wedge Steel Anchor Bolt M16*120m أولاً على السبتية استيل لتجارة المعادن.

Stainless Square Tube is ideal for all structural applications where greater strength and superior corrosion resistance is required. Having a durable mill finish Stainless Square Tube is widely used for all types of fabrication projects that are exposed to the elements – chemical, acidic, fresh water, and salt water environments.

• Specifications: ASTM A554, 304, 316 Mill Finish or stain finish , Not Polished or mirror finish 
• AKA: structural stainless tube, stainless box tube
• Applications: frame work, braces, supports, marine, food,decorative, Frames, roll cages, truck racks, trailers, railings,  etc.
• Workability: Easy to Weld, Moderate Cutting, Forming and Machining.
• Mechanical Properties: Brinell = 170, Tensile = 85,000 +/-, Yield = 34,000 +/-,
  Nonmagnetic
•  Outside Diameter: 10*10mm to 80*80mm
•  Wall Thickness: 0.25mm—3mm in our stoke now 1.25mm to 3 mm 6 m

ظهرت المقالة <p>علبة لميع مربعه 100×100 سمك2 مم304 طول 6م <p/> SS Mirror Square Tube 304 100×100×2 mm أولاً على السبتية استيل لتجارة المعادن.

6061 Aluminum Flat Bar, is an extruded solid aluminum rectangle bar that is easy to work with and has a wide range of applications.

Aluminum Flats are widely used for all types of fabrication projects where lightweight and corrosion resistance is a concern.

Metals Depot stocks hundreds of sizes of aluminum flats that you can buy online in ready to ship precut or mill lengths or you can order just what you need custom Cut to Size in small or large quantity at wholesale prices. Custom sizes are also available sheared or saw cut from plate.

Strip flats are sheared from sheet and may have curvature or twist, extruded tolerances not applicable. 

Provided in raw mill finish 

SPECIFICATIONS:

6061-T6511; ASTM B221; AMS-QQ-A-200/8

FINISH:

Extruded Mill Finish, Not Polished

CHARACTERISTICS:

Welding = Excellent
Machining / Grinding = Good
Bending / Forming = Poor
Wear Resistance = Good
Corrosion Resistance = Good

MECHANICAL PROPERTIES:

Tensile Strength = 45 ksi; Yield Point = 40 ksi
Shear Strength = 30 ksi; Elasticity = 10 ksi
Elongation in 2″ = 17%; Fatigue Limit = 14 ksi
Brinell Hardness = 95; Melting Point = 1220F
*Data provided for reference only

AVAILABLE LENGTHS:

2ft, 4ft, 6ft, 12ft or Custom Cut
Standard Length Tolerance = +/- 1/4″
Custom Cut Tolerance = +/- 1/16″

ظهرت المقالة 20 * 40 Aluminum 7050 Flat Bar<p> خوصة الومنيوم 7050 20×40 أولاً على السبتية استيل لتجارة المعادن.