30.00 EGP
مسمار انكور هيلتي استانلس 304 12*100مم
Wedge SS 304Anchor Bolt M12*100m
SKU: 5000مسمار تثبيت انكورهيلتي ويطلق عليه اكمون هيلتي وايضا انكور بولت
يتوافر منه مقاسات متنوعه استانلس 304-316
1.150.00 EGP
فلانشة304 استانلس8 بوصة سمك 15مم < 15× p> SS Flange 304 8 Inch
SKU: 014304F615-1فلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤
2.225.00 EGP
خوصة استانلس 304 40*5 مم 304 6 م
SS 304 Flat Bar 40*5 mm
SKU: N/A-
304/304L Stainless Steel Alloy has excellent mechanical properties and is resistant to many corrosive agents.
It is useful where sanitation and cleanliness are important. Non magnetic in the annealed condition. Hardness and tensile strength can be increased by cold working, but modified by lowered carbon content providing good resistance to corrosion in welded construction where subsequent heat treatment is not practical.
2.510.00 EGP
شيك بلف البان طبق (ويفر) مقاس 4 بوصة
SS Check Valve Wafer 4 Inch
SKU: N/Aشيك بلف البان طبق لو ويفر او مسمار يستخدم فى منتجات الالبان والاغذية والادوية والصناعات الكيماوية المختلفة
3.850.00 EGP
شيك بلف البان طبق (ويفر) مقاس 6 بوصة
SS Check Valve Wafer 6 Inch
SKU: N/Aشيك بلف البان طبق لو ويفر او مسمار يستخدم فى منتجات الالبان والاغذية والادوية والصناعات الكيماوية المختلفة
37.100.00 EGP
عمود الومنيوم مربع 250*250مم 2011 طول 1 م
AL 2011 square bar 250*250 MM,1M
SKU: Al022201250الومنيوم مستورد مربع ايطالى المنشأ سعر المتر الواحد
امكانية التتقطيع بمقاسات مختلفة
21.375.00 EGP
عمود الومنيوم مربع 180*180مم 2011 طول 1 م
AL 2011 square bar 180*180 MM,1M
SKU: Al022201180View Product
2.475.00 EGP
Aluminum Sheet 1.25*2.5*3 mm
– الواح الومنيوم 1.25*2.5*3مم
SKU: Al10010211.252.53View Product
330.00 EGP
Aluminum Sheet 1*2*0.5 mm
– لوح الومنيوم 1*2*0.5مم
SKU: 211001123الواح الومنيوم بيور مقاسات مختلفه 1*2 1050
1.25*2.5
1.5*3
1.6*3
2.100.00 EGP
محبس عدم رجوع البان استانلس 316 مقاس 3بوصة
-SS Check Valve 316 3 inch
SKU: 014-304-3nrvView Product
50.00 EGP
بالتة حديد 20*20سم سمك 5مم
Steel Plate 20cm*20cm T 5 mm
SKU: 020135203-2بالتة حديد بالتقطيع المسبق -قطعه من اللوح
110.00 EGP
بالتة حديد 30*30سم سمك 5مم
Steel Plate 30cm*30cm T 3mm
SKU: 020135203-1بالتة حديد تقطيع بالطلب المسبق توريد فورا لاعمال التثبيت
1.00 EGP
Square Steel Tube 50*50*3 mm
ماسورة مربعه(علبة) حديد 5سم *5سم سمك 3مم
SKU: 02350503Square Steel Tube is a welded structural grade tubing that is available in either type A513 or A500 Grade B, depending on it’s size and wall thickness. Either grade is ideal for all structural applications, general fabrication, manufacturing and repairs. Steel Square Tube is widely used in industrial maintenance, agricultural implements, transportation equipment, truck beds, trailers, frames, etc. It’s box-shape configuration allows for much greater strength and rigidity compared to angles or channels. This steel shape is easy to weld, cut, form and machine with the proper equipment and knowledge.
3.600.00 EGP
“1 Pneumatic Stainless Steel Angle Seat Threaded End Valve
SKU: N/AStainless steel angle seat valves
View our wide range of stainless steel pneumatic angle seat valves. Angle seat valves are designed to have the valve seat placed at an angle in a Y-shape, which is advantageous because it allows the medium to flow through relatively easily (few bends) for minimal flow and pressure loss. They have better flow characteristics than vertical globe valves. It operates by having a spindle move in a linear motion by an air-operated piston to move the seal towards or away from the valve seat. This seal is usually PTFE (teflon) and the valve housing is stainless steel. Angle seat valves are reliable, durable, require low maintenance and are characterized by a long lifespan with millions of cycles. They can be used in applications for gases, vacuum or (viscous) liquids and offer a seal in both in and out directions. Other names for these valves are shut-off valves, Y-valves or angle seat piston valves. The valve generally closes in the same direction as the flow direction. There are special versions where the valve closes against the flow direction, in order to reduce the risk of water hammer.
<
p dir="ltr">
1.150.00 EGP
فلانشة304 استانلس 6بوصة سمك 15مم < 15× p> SS Flange 304 6 Inch
SKU: 014304F615فلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤
50 * 150 Aluminum 7050 Flat Bar
خوصة الومنيوم 7050 150*50
SKU: Al0302606150-150مسمار انكور هيلتي استانلس 304 12*100مم
Wedge SS 304Anchor Bolt M12*100m
مسمار تثبيت انكورهيلتي ويطلق عليه اكمون هيلتي وايضا انكور بولت
يتوافر منه مقاسات متنوعه استانلس 304-316
فلانشة304 استانلس8 بوصة سمك 15مم < 15× p> SS Flange 304 8 Inch
فلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤
خوصة استانلس 304 40*5 مم 304 6 م
SS 304 Flat Bar 40*5 mm
-
304/304L Stainless Steel Alloy has excellent mechanical properties and is resistant to many corrosive agents.
It is useful where sanitation and cleanliness are important. Non magnetic in the annealed condition. Hardness and tensile strength can be increased by cold working, but modified by lowered carbon content providing good resistance to corrosion in welded construction where subsequent heat treatment is not practical.
شيك بلف البان طبق (ويفر) مقاس 4 بوصة
SS Check Valve Wafer 4 Inch
شيك بلف البان طبق لو ويفر او مسمار يستخدم فى منتجات الالبان والاغذية والادوية والصناعات الكيماوية المختلفة
شيك بلف البان طبق (ويفر) مقاس 6 بوصة
SS Check Valve Wafer 6 Inch
شيك بلف البان طبق لو ويفر او مسمار يستخدم فى منتجات الالبان والاغذية والادوية والصناعات الكيماوية المختلفة
عمود الومنيوم مربع 250*250مم 2011 طول 1 م
AL 2011 square bar 250*250 MM,1M
الومنيوم مستورد مربع ايطالى المنشأ سعر المتر الواحد
امكانية التتقطيع بمقاسات مختلفة
Aluminum Sheet 1.25*2.5*3 mm
– الواح الومنيوم 1.25*2.5*3مم
SKU: Al10010211.252.53Aluminum Sheet 1*2*0.5 mm
– لوح الومنيوم 1*2*0.5مم
الواح الومنيوم بيور مقاسات مختلفه 1*2 1050
1.25*2.5
1.5*3
1.6*3
بالتة حديد 20*20سم سمك 5مم
Steel Plate 20cm*20cm T 5 mm
بالتة حديد بالتقطيع المسبق -قطعه من اللوح
بالتة حديد 30*30سم سمك 5مم
Steel Plate 30cm*30cm T 3mm
بالتة حديد تقطيع بالطلب المسبق توريد فورا لاعمال التثبيت
Square Steel Tube 50*50*3 mm
ماسورة مربعه(علبة) حديد 5سم *5سم سمك 3مم
Square Steel Tube is a welded structural grade tubing that is available in either type A513 or A500 Grade B, depending on it’s size and wall thickness. Either grade is ideal for all structural applications, general fabrication, manufacturing and repairs. Steel Square Tube is widely used in industrial maintenance, agricultural implements, transportation equipment, truck beds, trailers, frames, etc. It’s box-shape configuration allows for much greater strength and rigidity compared to angles or channels. This steel shape is easy to weld, cut, form and machine with the proper equipment and knowledge.
“1 Pneumatic Stainless Steel Angle Seat Threaded End Valve
Stainless steel angle seat valves
View our wide range of stainless steel pneumatic angle seat valves. Angle seat valves are designed to have the valve seat placed at an angle in a Y-shape, which is advantageous because it allows the medium to flow through relatively easily (few bends) for minimal flow and pressure loss. They have better flow characteristics than vertical globe valves. It operates by having a spindle move in a linear motion by an air-operated piston to move the seal towards or away from the valve seat. This seal is usually PTFE (teflon) and the valve housing is stainless steel. Angle seat valves are reliable, durable, require low maintenance and are characterized by a long lifespan with millions of cycles. They can be used in applications for gases, vacuum or (viscous) liquids and offer a seal in both in and out directions. Other names for these valves are shut-off valves, Y-valves or angle seat piston valves. The valve generally closes in the same direction as the flow direction. There are special versions where the valve closes against the flow direction, in order to reduce the risk of water hammer.
<
p dir="ltr">
فلانشة304 استانلس 6بوصة سمك 15مم < 15× p> SS Flange 304 6 Inch
فلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤
مسمار انكور هيلتي استانلس 304 12*100مم
Wedge SS 304Anchor Bolt M12*100m
مسمار تثبيت انكورهيلتي ويطلق عليه اكمون هيلتي وايضا انكور بولت
يتوافر منه مقاسات متنوعه استانلس 304-316
فلانشة304 استانلس8 بوصة سمك 15مم < 15× p> SS Flange 304 8 Inch
فلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤
خوصة استانلس 304 40*5 مم 304 6 م
SS 304 Flat Bar 40*5 mm
-
304/304L Stainless Steel Alloy has excellent mechanical properties and is resistant to many corrosive agents.
It is useful where sanitation and cleanliness are important. Non magnetic in the annealed condition. Hardness and tensile strength can be increased by cold working, but modified by lowered carbon content providing good resistance to corrosion in welded construction where subsequent heat treatment is not practical.
شيك بلف البان طبق (ويفر) مقاس 4 بوصة
SS Check Valve Wafer 4 Inch
شيك بلف البان طبق لو ويفر او مسمار يستخدم فى منتجات الالبان والاغذية والادوية والصناعات الكيماوية المختلفة
شيك بلف البان طبق (ويفر) مقاس 6 بوصة
SS Check Valve Wafer 6 Inch
شيك بلف البان طبق لو ويفر او مسمار يستخدم فى منتجات الالبان والاغذية والادوية والصناعات الكيماوية المختلفة
عمود الومنيوم مربع 250*250مم 2011 طول 1 م
AL 2011 square bar 250*250 MM,1M
الومنيوم مستورد مربع ايطالى المنشأ سعر المتر الواحد
امكانية التتقطيع بمقاسات مختلفة
Aluminum Sheet 1*2*0.5 mm
– لوح الومنيوم 1*2*0.5مم
الواح الومنيوم بيور مقاسات مختلفه 1*2 1050
1.25*2.5
1.5*3
1.6*3
بالتة حديد 20*20سم سمك 5مم
Steel Plate 20cm*20cm T 5 mm
بالتة حديد بالتقطيع المسبق -قطعه من اللوح
بالتة حديد 30*30سم سمك 5مم
Steel Plate 30cm*30cm T 3mm
بالتة حديد تقطيع بالطلب المسبق توريد فورا لاعمال التثبيت
Square Steel Tube 50*50*3 mm
ماسورة مربعه(علبة) حديد 5سم *5سم سمك 3مم
Square Steel Tube is a welded structural grade tubing that is available in either type A513 or A500 Grade B, depending on it’s size and wall thickness. Either grade is ideal for all structural applications, general fabrication, manufacturing and repairs. Steel Square Tube is widely used in industrial maintenance, agricultural implements, transportation equipment, truck beds, trailers, frames, etc. It’s box-shape configuration allows for much greater strength and rigidity compared to angles or channels. This steel shape is easy to weld, cut, form and machine with the proper equipment and knowledge.
“1 Pneumatic Stainless Steel Angle Seat Threaded End Valve
Stainless steel angle seat valves
View our wide range of stainless steel pneumatic angle seat valves. Angle seat valves are designed to have the valve seat placed at an angle in a Y-shape, which is advantageous because it allows the medium to flow through relatively easily (few bends) for minimal flow and pressure loss. They have better flow characteristics than vertical globe valves. It operates by having a spindle move in a linear motion by an air-operated piston to move the seal towards or away from the valve seat. This seal is usually PTFE (teflon) and the valve housing is stainless steel. Angle seat valves are reliable, durable, require low maintenance and are characterized by a long lifespan with millions of cycles. They can be used in applications for gases, vacuum or (viscous) liquids and offer a seal in both in and out directions. Other names for these valves are shut-off valves, Y-valves or angle seat piston valves. The valve generally closes in the same direction as the flow direction. There are special versions where the valve closes against the flow direction, in order to reduce the risk of water hammer.
<
p dir="ltr">
فلانشة304 استانلس 6بوصة سمك 15مم < 15× p> SS Flange 304 6 Inch
فلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤
مسمار انكور هيلتي استانلس 304 12*100مم
Wedge SS 304Anchor Bolt M12*100m
مسمار تثبيت انكورهيلتي ويطلق عليه اكمون هيلتي وايضا انكور بولت
يتوافر منه مقاسات متنوعه استانلس 304-316
فلانشة304 استانلس8 بوصة سمك 15مم < 15× p> SS Flange 304 8 Inch
فلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤
خوصة استانلس 304 40*5 مم 304 6 م
SS 304 Flat Bar 40*5 mm
-
304/304L Stainless Steel Alloy has excellent mechanical properties and is resistant to many corrosive agents.
It is useful where sanitation and cleanliness are important. Non magnetic in the annealed condition. Hardness and tensile strength can be increased by cold working, but modified by lowered carbon content providing good resistance to corrosion in welded construction where subsequent heat treatment is not practical.
شيك بلف البان طبق (ويفر) مقاس 4 بوصة
SS Check Valve Wafer 4 Inch
شيك بلف البان طبق لو ويفر او مسمار يستخدم فى منتجات الالبان والاغذية والادوية والصناعات الكيماوية المختلفة
شيك بلف البان طبق (ويفر) مقاس 6 بوصة
SS Check Valve Wafer 6 Inch
شيك بلف البان طبق لو ويفر او مسمار يستخدم فى منتجات الالبان والاغذية والادوية والصناعات الكيماوية المختلفة
عمود الومنيوم مربع 250*250مم 2011 طول 1 م
AL 2011 square bar 250*250 MM,1M
الومنيوم مستورد مربع ايطالى المنشأ سعر المتر الواحد
امكانية التتقطيع بمقاسات مختلفة
Aluminum Sheet 1*2*0.5 mm
– لوح الومنيوم 1*2*0.5مم
الواح الومنيوم بيور مقاسات مختلفه 1*2 1050
1.25*2.5
1.5*3
1.6*3
بالتة حديد 20*20سم سمك 5مم
Steel Plate 20cm*20cm T 5 mm
بالتة حديد بالتقطيع المسبق -قطعه من اللوح
بالتة حديد 30*30سم سمك 5مم
Steel Plate 30cm*30cm T 3mm
بالتة حديد تقطيع بالطلب المسبق توريد فورا لاعمال التثبيت
Square Steel Tube 50*50*3 mm
ماسورة مربعه(علبة) حديد 5سم *5سم سمك 3مم
Square Steel Tube is a welded structural grade tubing that is available in either type A513 or A500 Grade B, depending on it’s size and wall thickness. Either grade is ideal for all structural applications, general fabrication, manufacturing and repairs. Steel Square Tube is widely used in industrial maintenance, agricultural implements, transportation equipment, truck beds, trailers, frames, etc. It’s box-shape configuration allows for much greater strength and rigidity compared to angles or channels. This steel shape is easy to weld, cut, form and machine with the proper equipment and knowledge.
“1 Pneumatic Stainless Steel Angle Seat Threaded End Valve
Stainless steel angle seat valves
View our wide range of stainless steel pneumatic angle seat valves. Angle seat valves are designed to have the valve seat placed at an angle in a Y-shape, which is advantageous because it allows the medium to flow through relatively easily (few bends) for minimal flow and pressure loss. They have better flow characteristics than vertical globe valves. It operates by having a spindle move in a linear motion by an air-operated piston to move the seal towards or away from the valve seat. This seal is usually PTFE (teflon) and the valve housing is stainless steel. Angle seat valves are reliable, durable, require low maintenance and are characterized by a long lifespan with millions of cycles. They can be used in applications for gases, vacuum or (viscous) liquids and offer a seal in both in and out directions. Other names for these valves are shut-off valves, Y-valves or angle seat piston valves. The valve generally closes in the same direction as the flow direction. There are special versions where the valve closes against the flow direction, in order to reduce the risk of water hammer.
<
p dir="ltr">
فلانشة304 استانلس 6بوصة سمك 15مم < 15× p> SS Flange 304 6 Inch
فلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤