Showing 2641–2656 of 4065 resultsSorted by popularity
-
2.225,00 EGP
-
304/304L Stainless Steel Alloy has excellent mechanical properties and is resistant to many corrosive agents.
It is useful where sanitation and cleanliness are important. Non magnetic in the annealed condition. Hardness and tensile strength can be increased by cold working, but modified by lowered carbon content providing good resistance to corrosion in welded construction where subsequent heat treatment is not practical.
-
2.510,00 EGP
شيك بلف البان طبق لو ويفر او مسمار يستخدم فى منتجات الالبان والاغذية والادوية والصناعات الكيماوية المختلفة
-
37.100,00 EGP
الومنيوم مستورد مربع ايطالى المنشأ سعر المتر الواحد
امكانية التتقطيع بمقاسات مختلفة
-
3.850,00 EGP
شيك بلف البان طبق لو ويفر او مسمار يستخدم فى منتجات الالبان والاغذية والادوية والصناعات الكيماوية المختلفة
-
21.375,00 EGP
Aluminum Bar , is an extruded solid aluminum bar that is highly versatile, easy to work with and has a wide range of applications. 6061 Aluminum squar is our Most Popular aluminum round that is widely used for all types of fabrication projects where lightweight and corrosion resistance is a concern. Ideal for fabricating pins, shafts, dowles,…
-
-
-
-
13.000,00 EGP
بالتة حديد بالتقطيع المسبق -قطعه من اللوح
-
110,00 EGP
بالتة حديد تقطيع بالطلب المسبق توريد فورا لاعمال التثبيت
-
3.600,00 EGP
Stainless steel angle seat valves
View our wide range of stainless steel pneumatic angle seat valves. Angle seat valves are designed to have the valve seat placed at an angle in a Y-shape, which is advantageous because it allows the medium to flow through relatively easily (few bends) for minimal flow and pressure loss. They have better flow characteristics than vertical globe valves. It operates by having a spindle move in a linear motion by an air-operated piston to move the seal towards or away from the valve seat. This seal is usually PTFE (teflon) and the valve housing is stainless steel. Angle seat valves are reliable, durable, require low maintenance and are characterized by a long lifespan with millions of cycles. They can be used in applications for gases, vacuum or (viscous) liquids and offer a seal in both in and out directions. Other names for these valves are shut-off valves, Y-valves or angle seat piston valves. The valve generally closes in the same direction as the flow direction. There are special versions where the valve closes against the flow direction, in order to reduce the risk of water hammer.
-
1.150,00 EGP
فلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤
-
550,00 EGP
فلانشات استانلس استيل مواصفات مختلفة 304-316-321-310- استيراد وتصنيع عامية ومخرمة ومقلوظة وبرقبة وبشفة ومسلوبة ,وثابتة ومتحركة ….الخ باختلاف الجداول والضغوط والpn مقاسات من 3/8 بوصة الى 24 بوصة مع امكانية تصنيع وتخريم الفلانشات والطبب بمقاساتكم المختلفة من اي سمك بلازما او نظيفة بجودةعالية بمخارط وفرايز cnc
-
750,00 EGP
فلانشة استانلس ٣٠٤ تصنيع محلي خامه اوروبيه امريكية او المانيه او هندية حسب المتوفر السمك ١٥ بالطلب ويوجد الي ٣٠مم واقل شيء بالطلب ٨مم او١٠ او١٢
-
19.740,00 EGP
Weld neck flanges are used in applications where the conditions are severe and critical. Some of these conditions include high pressure, wide fluctuations in temperature and pressure, high temperature, fluids that are volatile and hazardous, and temperatures in the sub-zero range.
Weld neck flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.
During a dimensional inspection of weld neck flange, you should check for
- Outer & Inner Diameter of body
- Bolt Circle & Bolt hole Diameter
- the thickness of weld end
- Length of the Hub and
- Straightness and alignment of the bolt hole
-
1,00 EGP
عمدان مسدس مسمطة اسياخ نحاس اصفر جودة عالية مقاسات مختلفة
