بالتة حديد مقطعة بالطلب المسبق1*1 م سمك 25مم Steel Plate 1*1 m T 25 mm
13.000,00 EGP
بالتة حديد بالتقطيع المسبق -قطعه من اللوح
Showing 2657–2672 of 4073 resultsSorted by popularity
-
بالتة حديد مقطعة بالطلب المسبق1*1 م سمك 25مم
13.000,00 EGP -
بالتة حديد 30*30سم سمك 5مم
110,00 EGPSteel Plate 30cm*30cm T 3mm
بالتة حديد تقطيع بالطلب المسبق توريد فورا لاعمال التثبيت
-
“1 Pneumatic Stainless Steel Angle Seat Threaded End Valve
3.600,00 EGPStainless steel angle seat valves
View our wide range of stainless steel pneumatic angle seat valves. Angle seat valves are designed to have the valve seat placed at an angle in a Y-shape, which is advantageous because it allows the medium to flow through relatively easily (few bends) for minimal flow and pressure loss. They have better flow characteristics than vertical globe valves. It operates by having a spindle move in a linear motion by an air-operated piston to move the seal towards or away from the valve seat. This seal is usually PTFE (teflon) and the valve housing is stainless steel. Angle seat valves are reliable, durable, require low maintenance and are characterized by a long lifespan with millions of cycles. They can be used in applications for gases, vacuum or (viscous) liquids and offer a seal in both in and out directions. Other names for these valves are shut-off valves, Y-valves or angle seat piston valves. The valve generally closes in the same direction as the flow direction. There are special versions where the valve closes against the flow direction, in order to reduce the risk of water hammer.
-
فلانشة304 استانلس 6بوصة سمك 15مم < 15× p> SS Flange 304 6 Inch
1.150,00 EGPفلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤
-
فلانشة 304 استانلس استيل 4 بوصة سمك 10مم
550,00 EGPp> 304 SS Flange 4 Inch Thin 10 mm>
فلانشات استانلس استيل مواصفات مختلفة 304-316-321-310- استيراد وتصنيع عامية ومخرمة ومقلوظة وبرقبة وبشفة ومسلوبة ,وثابتة ومتحركة ….الخ باختلاف الجداول والضغوط والpn مقاسات من 3/8 بوصة الى 24 بوصة مع امكانية تصنيع وتخريم الفلانشات والطبب بمقاساتكم المختلفة من اي سمك بلازما او نظيفة بجودةعالية بمخارط وفرايز cnc
-
فلانشة 304 استانلس استيل 3 بوصة سمك 15مم
750,00 EGP304 SS Flange 3Inch Thin 15mm
فلانشة استانلس ٣٠٤ تصنيع محلي خامه اوروبيه امريكية او المانيه او هندية حسب المتوفر السمك ١٥ بالطلب ويوجد الي ٣٠مم واقل شيء بالطلب ٨مم او١٠ او١٢
-
فلانشة استانلس برقبة ٣١٦ ج ٤٠ مقاس ١٠ بوصة #٣٠٠
19.740,00 EGPSS Flange Wn 316 #300 sch 40 10 inch
Weld neck flanges are used in applications where the conditions are severe and critical. Some of these conditions include high pressure, wide fluctuations in temperature and pressure, high temperature, fluids that are volatile and hazardous, and temperatures in the sub-zero range.Weld neck flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.
During a dimensional inspection of weld neck flange, you should check for
- Outer & Inner Diameter of body
- Bolt Circle & Bolt hole Diameter
- the thickness of weld end
- Length of the Hub and
- Straightness and alignment of the bolt hole
-
Brass Hex Bar from 20 to50 mm
1,00 EGP– نحاس اصفر عمدان مسدسه مقاس 20الي 50مم)
عمدان مسدس مسمطة اسياخ نحاس اصفر جودة عالية مقاسات مختلفة
-
Carbon Steel ASTM A106 Pipes Seamless 8 Inch Sch40 6 m China
9.000,00 EGPماسورة كاربون استيل 8 بوصة ج40 طول 6م صيني
ASTM A106 is for Seamless Carbon Steel Pipe for High-Temperature Service
This specification covers carbon steel pipe for high-temperature service. These pipes are suitable for welding, bending, flanging, and similar forming operations. Mechanical testing of the specimens shall include tensile, bending, flattening, hydrostatic and nondestructive electric tests. Specimens undergoing bending tests shall consist of sections cut from a pipe. For flattening tests, the specimens shall be smooth on the ends and burr-free, except when made on crop ends. All tests shall be performed in room temperature. If any test specimen shows flaws it can be discarded and substituted for another test specimen. Before testing, if a specimen has scribe scratches, a retest shall be allowed. A retest shall also be allowed if a specimen breaks in an inside or outside surface flaw.
-
-
كوع كاربون استيل 6 بوصة
400,00 EGPCarbon Steel Elbow 6 Inch
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
-
كوع كاربون استيل 3 بوصة
145,00 EGPCarbon Steel Elbow 3 Inch
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
-
كوع كاربون استيل 4 بوصة
50,00 EGPCarbon Steel Elbow 4 Inch
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
-
-
تية كاربون استيل عدل 10 بوصة
4.000,00 EGPEqual Tee Carbon Steel 10 inch
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
-
كوع كاربون ستيل سيملس 10 ج40
3.250,00 EGPCarbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them