Showing 1169–1184 of 4069 resultsSorted by popularity
-
183.600,00 EGP
Grade 310, 310S, 310H
Grade 310 (UNS S31000) and its various subgrades combine excellent high temperature
properties with good ductility and weldability.
Grade 310H (UNS S31009) has a carbon content restricted to exclude the lower end of the 310
range, so is the grade of choice for high temperature applications.
Grade 310S (UNS S31008) is used when the application environment involves moist corrodents in
a temperature range lower than that which is normally considered “high temperature” service. The
lower carbon content of 310S does reduce its high temperature strength compared to 310H.
Grade 310L is a series of proprietary grades, generally with a 0.03% maximum carbon and
sometimes used for very specific corrosive environments such as urea production.
Like other austenitic grades the 310 family have excellent toughness, even down to cryogenic
temperatures, although other grades are normally used in sub-zero environments.
Typical Applications
Furnace parts. Oil burner parts. Carburizing boxes. Heat Treatment baskets and jigs. Heat
exchangers. Welding filler wire and electrodes.
-
-
2.130,00 EGP
Application For construction parts which should be resistant to scaling up to about 1050°C and extensively inured to the effect of sulfurous gases, especially above 900°C, is very low
-
-
1,00 EGP
Also known as Schedule 10 fittings, these are thin and lightweight. They have beveled ends that, when flush to pipe, create a trough for a strong weld that permits maximum flow.
304 stainless steel fittings have very good corrosion resistance. 316 stainless steel fittings have excellent corrosion resistance.
Offset straight reducers are also known as eccentric reducers; they connect one pipe to another smaller-diameter pipe and have the centers offset so your line can drain.
-
-
1,00 EGP
بالتات مقطعه بالطلب المسبق
شريحه الومنيوم
-
1,00 EGP
Full Hex Nuts Standard Pitch – ISO 4032 (DIN 934) Hexagon full nut to DIN standard 934 with standard metric coarse pitch. Typically fitted with a spanner or ratchet with socket. The most popular nut type, and used for decades on all types of assemblies throughout the world. Can be used in conjunction with Hexagon Thin nuts in a ’locking’ formation for a more secure fitment. Fine pitch and left hand thread variants are also available immediately below this item.
-
1,00 EGP
These Stainless-Steel Hex Bolts are a highly versatile solution to fastening applications. Able to be adjusted with either a spanner or torque wrench with appropriate socket bits, they present an easy to access fastener head that can be manipulated at multiple angles.
Applications
</
Hexagon bolt fixing is a reliable fastener for a wide selection of building project and repair jobs.
• Construction
• Automobile
• Engineering industries
• Docks
• Bridges
• Highway Structures</
مسمار استانلس اسنيل مسدس 304 اقطار مختلفة منشأ صينى وهندي والمانى</
يتوافر العديد من المقاسات ويوجد تصنيع بالطلب المسبق للاقطار الكبيرة</
داخل وخارج مصر</
-
-
6.020,00 EGP
لوح مط مقطع بالطلب 12 مم 1*1م 304
-
-
-
-
-
