Shop

  • <p> لوح استانلس استيل 430 لميع مغلف بارد 1*2*0.3 مم </p><p>S.S Sheet 430 AB COVERED 1* 2 * .3 mm </p>

    لوح استانلس استيل 430 لميع مغلف بارد 1*2*0.3 مم

    S.S Sheet 430 AB COVERED 1* 2 * .3 mm

    830,00 EGP

    “Stainless steel grade 430 is a non-hardenable steel containing straight chromium, and belongs to the ferritic group of steels. This steel is known for its good corrosion resistance and formability, coupled with practical mechanical properties. It can be used in certain chemical applications due to its resistance to nitric acid.The following are the applications for stainless steel grade 430:

    Dish washer linings
    Refrigerator cabinet panels
    Element supports and fasteners
    Stove trim rings and chimney liners
    Automotive trim and lashing wire
    “

    Add to cartDone
  • coils

    بكرة لفف استانلس 430سمك 0.3مم عرض 1.25م

    430 SS coil 0.3mm W1.25 m

    100,00 EGP

    لفف بكر استانلس مواصفات مختلفة ومقاسات وعرض مختلفة
    من 50سم تشريح او عرض 1-1.25-1.5 -2 م
    يمكن البيع بكرة او تقطيع للغير
    ويوجد مقاسات عرض اكبر من ذلك استيراد 2 م – 2.5 م – 3 م بالطلب المسبق استيراد الماني تايواني اسباني صيني فيتنامي

    Add to cartDone
  • coils

    بكرة لفف استانلس 430سمك 0.3مم عرض 1

    430 SS coil 0.3mm W1m

    100,00 EGP

    لفف بكر استانلس مواصفات مختلفة ومقاسات وعرض مختلفة
    من 50سم تشريح او عرض 1-1.25-1.5 -2 م
    يمكن البيع بكرة او تقطيع للغير
    ويوجد مقاسات عرض اكبر من ذلك استيراد 2 م – 2.5 م – 3 م بالطلب المسبق استيراد الماني تايواني اسباني صيني فيتنامي

    Add to cartDone
  • الواح الومنيوم

    Aluminum Sheet 1050 1.5*3* 3 mm

    – الواح الومنيوم 1.5*3 سمك 3 مم

    9.110,00 EGP

    لوح الومنيوم بيور كود ١٠٥٠ نجع حمادي

    Add to cartDone
  • Alu.1050 Sheet 1.25*2.5 Thin 6mm <p> - لوح الومنيوم مواصفة 1050 1.25×2.5 سمك 6مم

    Alu.1050 Sheet 1.25*2.5 Thin 6mm

    – لوح الومنيوم مواصفة 1050 1.25×2.5 سمك 6مم

    1,00 EGP

    الواح الومنيوم بيور مقاسات مختلفه 1*2 1050

    1.25*2.5

    1.5*3

    1.6*3

     

    Add to cartDone
  • مواسير الومنويم انواع مختلفه

    AluminumPIPE 6063 SIZE OD 8 mm X Wall 1.2 mm 6M

    ماسورة الومنيوم 8* 1.2 مم 6 م

    205,00 EGP
    SPECIFICATIONS:

    6061-T6; 6063-T6; ASTM B429

    FINISH:

    Extruded Mill Finish, Not Polished

    CHARACTERISTICS:

    Welding = Excellent
    Machining / Grinding = Good
    Bending / Forming = Fair
    Wear Resistance = Fair
    Corrosion Resistance = Good

    MECHANICAL PROPERTIES:

    Tensile Strength = 27 ksi (6063); 45 ksi (6061)
    Yield Strength = 21 ksi (6063); 40 ksi (6061)
    Elongation in 2″ = 18% (6063); 17% (6061)
    Brinell Hardness = 60 (6063); 95 (6061)
    *Data provided for reference only

    AVAILABLE LENGTHS:

    2ft, 4ft, 6ft, 8ft, 10ft, 20ft, or Custom Cut
    Standard Length Tolerance = +/- 1/4″
    Custom Cut Tolerance = +/- 1/16″

    HOW TO MEASURE:

    Nominal ID (A) X Schedule (wall) (B) X Length
    * Dimensions in Inches

    Add to cartDone
  • coils

    بكرة لفف استانلس 201 سمك 0.6مم عرض 1 متر

    SS 201 coil 0.6mm W 1m

    105,00 EGP

    لفف بكر استانلس مواصفات مختلفة ومقاسات وعرض مختلفة
    من 50سم تشريح او عرض 1-1.25-1.5 -2 م
    يمكن البيع بكرة او تقطيع للغير
    ويوجد مقاسات عرض اكبر من ذلك استيراد 2 م – 2.5 م – 3 م بالطلب المسبق استيراد الماني تايواني اسباني صيني فيتنامي

    Add to cartDone
  • coils

    بكرة لفف استانلس 201 سمك 0.5مم عرض 1 متر

    201SS coil 0.5 mm W 1m

    105,00 EGP

    لفف بكر استانلس مواصفات مختلفة ومقاسات وعرض مختلفة
    من 50سم تشريح او عرض 1-1.25-1.5 -2 م
    يمكن البيع بكرة او تقطيع للغير
    ويوجد مقاسات عرض اكبر من ذلك استيراد 2 م – 2.5 م – 3 م بالطلب المسبق استيراد الماني تايواني اسباني صيني فيتنامي

    Add to cartDone
  • </p>لوح استانلس استيل 310 مط بدون غلاف ساخن 1.5*3 م 15مم <p><p>SS Sheet hot matte uncovered 310 15mm1.5*3 m </p>

    لوح استانلس استيل 310 مط بدون غلاف ساخن 1.5*3 م 15مم

    SS Sheet hot matte uncovered 310 15mm1.5*3 m

    8.400,00 EGP

    Grade 310, 310S, 310H
    Grade 310 (UNS S31000) and its various subgrades combine excellent high temperature
    properties with good ductility and weldability.
    Grade 310H (UNS S31009) has a carbon content restricted to exclude the lower end of the 310
    range, so is the grade of choice for high temperature applications.
    Grade 310S (UNS S31008) is used when the application environment involves moist corrodents in
    a temperature range lower than that which is normally considered “high temperature” service. The
    lower carbon content of 310S does reduce its high temperature strength compared to 310H.
    Grade 310L is a series of proprietary grades, generally with a 0.03% maximum carbon and
    sometimes used for very specific corrosive environments such as urea production.
    Like other austenitic grades the 310 family have excellent toughness, even down to cryogenic
    temperatures, although other grades are normally used in sub-zero environments.

    Typical Applications
    Furnace parts. Oil burner parts. Carburizing boxes. Heat Treatment baskets and jigs. Heat
    exchangers. Welding filler wire and electrodes.

    Add to cartDone
  • </p>لوح استانلس استيل 310 مط بدون غلاف ساخن 1.5*3 م 14مم <p> <p>SS Sheet hot matte uncovered 310 14mm1.5*3 </p>

    لوح استانلس استيل 310 مط بدون غلاف ساخن 1.5*3 م 14مم

    SS Sheet hot matte uncovered 310 14mm1.5*3

    282.240,00 EGP

    Grade 310, 310S, 310H
    Grade 310 (UNS S31000) and its various subgrades combine excellent high temperature
    properties with good ductility and weldability.
    Grade 310H (UNS S31009) has a carbon content restricted to exclude the lower end of the 310
    range, so is the grade of choice for high temperature applications.
    Grade 310S (UNS S31008) is used when the application environment involves moist corrodents in
    a temperature range lower than that which is normally considered “high temperature” service. The
    lower carbon content of 310S does reduce its high temperature strength compared to 310H.
    Grade 310L is a series of proprietary grades, generally with a 0.03% maximum carbon and
    sometimes used for very specific corrosive environments such as urea production.
    Like other austenitic grades the 310 family have excellent toughness, even down to cryogenic
    temperatures, although other grades are normally used in sub-zero environments.

    Typical Applications
    Furnace parts. Oil burner parts. Carburizing boxes. Heat Treatment baskets and jigs. Heat
    exchangers. Welding filler wire and electrodes.

    Add to cartDone
  • </p>لوح استانلس استيل 310 مط بدون غلاف ساخن 1.5*3 م 13مم <p> <p>SS Sheet hot matte uncovered 310 13mm1.5*3 </p>

    لوح استانلس استيل 310 مط بدون غلاف ساخن 1.5*3 م 13مم

    SS Sheet hot matte uncovered 310 13mm1.5*3

    262.080,00 EGP

    Grade 310, 310S, 310H
    Grade 310 (UNS S31000) and its various subgrades combine excellent high temperature
    properties with good ductility and weldability.
    Grade 310H (UNS S31009) has a carbon content restricted to exclude the lower end of the 310
    range, so is the grade of choice for high temperature applications.
    Grade 310S (UNS S31008) is used when the application environment involves moist corrodents in
    a temperature range lower than that which is normally considered “high temperature” service. The
    lower carbon content of 310S does reduce its high temperature strength compared to 310H.
    Grade 310L is a series of proprietary grades, generally with a 0.03% maximum carbon and
    sometimes used for very specific corrosive environments such as urea production.
    Like other austenitic grades the 310 family have excellent toughness, even down to cryogenic
    temperatures, although other grades are normally used in sub-zero environments.

    Typical Applications
    Furnace parts. Oil burner parts. Carburizing boxes. Heat Treatment baskets and jigs. Heat
    exchangers. Welding filler wire and electrodes.

    Add to cartDone
  • </p>لوح استانلس استيل 310 مط بدون غلاف ساخن 1.5*3 م 12مم <p> <p>SS Sheet hot matte uncovered 310 12MM1.5*3 </p>

    لوح استانلس استيل 310 مط بدون غلاف ساخن 1.5*3 م 12مم

    SS Sheet hot matte uncovered 310 12MM1.5*3

    241.920,00 EGP

    Grade 310, 310S, 310H
    Grade 310 (UNS S31000) and its various subgrades combine excellent high temperature
    properties with good ductility and weldability.
    Grade 310H (UNS S31009) has a carbon content restricted to exclude the lower end of the 310
    range, so is the grade of choice for high temperature applications.
    Grade 310S (UNS S31008) is used when the application environment involves moist corrodents in
    a temperature range lower than that which is normally considered “high temperature” service. The
    lower carbon content of 310S does reduce its high temperature strength compared to 310H.
    Grade 310L is a series of proprietary grades, generally with a 0.03% maximum carbon and
    sometimes used for very specific corrosive environments such as urea production.
    Like other austenitic grades the 310 family have excellent toughness, even down to cryogenic
    temperatures, although other grades are normally used in sub-zero environments.

    Typical Applications
    Furnace parts. Oil burner parts. Carburizing boxes. Heat Treatment baskets and jigs. Heat
    exchangers. Welding filler wire and electrodes.

    Add to cartDone
  • </p>لوح استانلس استيل 310 مط بدون غلاف ساخن 1.5*3 م 11مم <p> <p>SS Sheet hot matte uncovered 310 11mm1.5*3 </p>

    لوح استانلس استيل 310 مط بدون غلاف ساخن 1.5*3 م 11مم

    SS Sheet hot matte uncovered 310 11mm1.5*3

    221.760,00 EGP

    Grade 310, 310S, 310H
    Grade 310 (UNS S31000) and its various subgrades combine excellent high temperature
    properties with good ductility and weldability.
    Grade 310H (UNS S31009) has a carbon content restricted to exclude the lower end of the 310
    range, so is the grade of choice for high temperature applications.
    Grade 310S (UNS S31008) is used when the application environment involves moist corrodents in
    a temperature range lower than that which is normally considered “high temperature” service. The
    lower carbon content of 310S does reduce its high temperature strength compared to 310H.
    Grade 310L is a series of proprietary grades, generally with a 0.03% maximum carbon and
    sometimes used for very specific corrosive environments such as urea production.
    Like other austenitic grades the 310 family have excellent toughness, even down to cryogenic
    temperatures, although other grades are normally used in sub-zero environments.

    Typical Applications
    Furnace parts. Oil burner parts. Carburizing boxes. Heat Treatment baskets and jigs. Heat
    exchangers. Welding filler wire and electrodes.

    Add to cartDone
  • </p>لوح استانلس استيل 310 مط بدون غلاف ساخن 1.5*3 م 8مم <p><p>SS Sheet hot matte uncovered 310 8mm1.5*3 m </p>

    لوح استانلس استيل 310 مط بدون غلاف ساخن 1.5*3 م 8مم

    SS Sheet hot matte uncovered 310 8mm1.5*3 m

    4.480,00 EGP

    Grade 310, 310S, 310H
    Grade 310 (UNS S31000) and its various subgrades combine excellent high temperature
    properties with good ductility and weldability.
    Grade 310H (UNS S31009) has a carbon content restricted to exclude the lower end of the 310
    range, so is the grade of choice for high temperature applications.
    Grade 310S (UNS S31008) is used when the application environment involves moist corrodents in
    a temperature range lower than that which is normally considered “high temperature” service. The
    lower carbon content of 310S does reduce its high temperature strength compared to 310H.
    Grade 310L is a series of proprietary grades, generally with a 0.03% maximum carbon and
    sometimes used for very specific corrosive environments such as urea production.
    Like other austenitic grades the 310 family have excellent toughness, even down to cryogenic
    temperatures, although other grades are normally used in sub-zero environments.

    Typical Applications
    Furnace parts. Oil burner parts. Carburizing boxes. Heat Treatment baskets and jigs. Heat
    exchangers. Welding filler wire and electrodes.

    Add to cartDone
  • </p>لوح استانلس استيل 310 مط بدون غلاف ساخن 1.5*3 م 7مم <p><p>SS Sheet hot matte uncovered 310 1.5*3 m </p>

    لوح استانلس استيل 310 مط بدون غلاف ساخن 1.5*3 م 7مم

    SS Sheet hot matte uncovered 310 1.5*3 m

    3.920,00 EGP

    Grade 310, 310S, 310H
    Grade 310 (UNS S31000) and its various subgrades combine excellent high temperature
    properties with good ductility and weldability.
    Grade 310H (UNS S31009) has a carbon content restricted to exclude the lower end of the 310
    range, so is the grade of choice for high temperature applications.
    Grade 310S (UNS S31008) is used when the application environment involves moist corrodents in
    a temperature range lower than that which is normally considered “high temperature” service. The
    lower carbon content of 310S does reduce its high temperature strength compared to 310H.
    Grade 310L is a series of proprietary grades, generally with a 0.03% maximum carbon and
    sometimes used for very specific corrosive environments such as urea production.
    Like other austenitic grades the 310 family have excellent toughness, even down to cryogenic
    temperatures, although other grades are normally used in sub-zero environments.

    Typical Applications
    Furnace parts. Oil burner parts. Carburizing boxes. Heat Treatment baskets and jigs. Heat
    exchangers. Welding filler wire and electrodes.

    Add to cartDone
  • </p>لوح استانلس استيل 310 مط بدون غلاف بارد 1.5*3 م 6مم <p><p>SS Sheet cold matte uncovered 310 6mm1.5*3 m </p>

    لوح استانلس استيل 310 مط بدون غلاف بارد 1.5*3 م 6مم

    SS Sheet cold matte uncovered 310 6mm1.5*3 m

    120.960,00 EGP

    Grade 310, 310S, 310H
    Grade 310 (UNS S31000) and its various subgrades combine excellent high temperature
    properties with good ductility and weldability.
    Grade 310H (UNS S31009) has a carbon content restricted to exclude the lower end of the 310
    range, so is the grade of choice for high temperature applications.
    Grade 310S (UNS S31008) is used when the application environment involves moist corrodents in
    a temperature range lower than that which is normally considered “high temperature” service. The
    lower carbon content of 310S does reduce its high temperature strength compared to 310H.
    Grade 310L is a series of proprietary grades, generally with a 0.03% maximum carbon and
    sometimes used for very specific corrosive environments such as urea production.
    Like other austenitic grades the 310 family have excellent toughness, even down to cryogenic
    temperatures, although other grades are normally used in sub-zero environments.

    Typical Applications
    Furnace parts. Oil burner parts. Carburizing boxes. Heat Treatment baskets and jigs. Heat
    exchangers. Welding filler wire and electrodes.

    Add to cartDone