-
×
10 * 40 Aluminum 7050 Flat Barخوصة الومنيوم 7050 10×40
1 × 850.00 EGP
المجموع: 850.00 EGP
2.280.00 EGP
Aluminum Sheet 1050 10 mm1×2 m
– الواح الومنيوم م10mm1×2 مم
SKU: Al021105010315لوح الومنيوم بيور كود ١٠٥٠ نجع حمادي
2.280.00 EGP
Aluminum Sheet 1050 15 mm1×2 m
– الواح الومنيوم م15mm1×2 مم
SKU: Al021105015315لوح الومنيوم بيور كود ١٠٥٠ نجع حمادي
11.100.00 EGP
لوح استانلس استيل ميرور 201 مط 1.25مم ×1.25×2.5م
SS 201 Mirror 1.25×2.5m×1.25mmSKU: 0112016125252bStainless steel grade 201 is a mid-range product typically found in appliances, cookware, sinks, kitchen utensils, and food service equipment. It is also found in automotive parts and clamps as well as railroad cars, and window trim. Its structural integrity and makeup make it ideal for uses in these industries. It tends to not be a good choice, however, for outdoor structural use, because it is susceptible to pitting and crevice corrosion from certain elements like salt water.
700.00 EGP
ماسورة لميع استانلس 316 سيمليس 8مم سمك1مم
316 SS Round Seamlles Tube Mirror OD 8 W 1mm 6m
SKU: 01331681msStainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
1.00 EGP
مسمار صلب 8.8 سمك 20مم * 70 مم
BOLT 8.8 20mm*70mm
SKU: 02FE8.87020مسمار صلب درجة الصلابة 8.8 مقاسات متنوعة وبضاعة حاضرة خصم خاص للكميات
38.000.00 EGP
فلانشة استانلس برقبة ٣١٦ ج ٤٠ مقاس 16بوصة #150
SS Flange Wn 316 #150 sch 40 16 inch
SKU: N/AWeld neck flanges are used in applications where the conditions are severe and critical. Some of these conditions include high pressure, wide fluctuations in temperature and pressure, high temperature, fluids that are volatile and hazardous, and temperatures in the sub-zero range.
Weld neck flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.
During a dimensional inspection of weld neck flange, you should check for
- Outer & Inner Diameter of body
- Bolt Circle & Bolt hole Diameter
- the thickness of weld end
- Length of the Hub and
- Straightness and alignment of the bolt hole
97.200.00 EGP
لوح استانلس استيل 316 مط بدون غلاف بارد 1.5*3 سمك 10مم S S sheet cold matte uncovered 316 1.5*3 m×10mm
SKU: 131610153لوح 316 للاستخدمات الطبية والكيماوية
50.760.00 EGP
لوح استانلس استيل 316 مط بدون غلاف بارد 1.5*3 سمك 6مم
S S sheet cold matte uncovered 316 1.5*3 ×6m
SKU: 13166153لوح 316 للاستخدمات الطبية والكيماوية
1.735.00 EGP
لوح استانلس استيل 201 لميع 1مم ×1.22م×2.5م
SS 201 Mirror k9 1.22×2.5m×1mmSKU: 011304-2B-0.8-1.222.44-1الواح لامع استيراد 1.22*2.44م سمك ١مم ويتوافر 0.6مم 0.8مم مناسبة لاعمال الديكور والانشاءات المختلفة
1.00 EGP
استانليس 304 مواسير عدلة مدور لميع لحام 4مم 0.45مم
304 SS Round AW Tube Mirror OD 4 mm 0.45
SKU: 01RT-304-6-.05-1-1-1Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
1.00 EGP
استانليس 304 مواسير عدلة مدور لميع لحام 3مم 0.45مم
304 SS Round AW Tube Mirror OD 3 mm 0.45 mm
SKU: 01RT-304-6-.05-1-1Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
1.00 EGP
استانليس 304 مواسير عدلة مدور لميع لحام 5مم 0.45مم
304 SS Round AW Tube Mirror OD 5 mm 0.5 mm
SKU: 01RT-304-6-.05-1Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
500.00 EGP
مادة فينش ياباني
Nichia staincleen 2kg
SKU: N/Aمادة فينش ياباني لتظيف وتلميع الاستانلس استيل
0.00 EGP
لوح استانلس استيل 304 مط بدون غلاف بارد 1.5* 3م 5مم
SS 304 Sheet Cold Matte Uncovered 5 mm 1.5* 3 m
SKU: 1130451.53ASTM A240 Type 304 Plate, AISI 304 Ring
Stainless Steel 304 Sheet is made up of an austenitic stainless steel that has 18% chromium and 8% nickel in the composition. This is the most used grade of all stainless steels in the world. The sheets are strong, mild corrosion resistant and have applications in a variety of industries. The Stainless Steel 304 Sheet also has manganese, carbon, silicon, sulfur, nitrogen and phosphorus in the composition. The material is strong and has 205MPa minimum yield strength and 515MPa minimum tensile strength in general
950.00 EGP ALU PIPE 6060 SIZE 60mm OD X 10mmW 1M
SKU: Al02360606010SPECIFICATIONS:
6061-T6; 6063-T6; ASTM B429
FINISH:
Extruded Mill Finish, Not Polished
CHARACTERISTICS:
Welding = Excellent
Machining / Grinding = Good
Bending / Forming = Fair
Wear Resistance = Fair
Corrosion Resistance = Good
MECHANICAL PROPERTIES:
Tensile Strength = 27 ksi (6063); 45 ksi (6061)
Yield Strength = 21 ksi (6063); 40 ksi (6061)
Elongation in 2″ = 18% (6063); 17% (6061)
Brinell Hardness = 60 (6063); 95 (6061)
*Data provided for reference only
AVAILABLE LENGTHS:
2ft, 4ft, 6ft, 8ft, 10ft, 20ft, or Custom Cut
Standard Length Tolerance = +/- 1/4″
Custom Cut Tolerance = +/- 1/16″
HOW TO MEASURE:
Nominal ID (A) X Schedule (wall) (B) X Length
* Dimensions in Inches
120.00 EGP
نبل قلاووظ استانلس 316 3/4 بوصة ج 40
316 S.S Threaded Nipple 3/4 Inch SCH 40
SKU: N-014-316-1-1Stainless Steel Pipe Fittings
Stainless steel fittings are made of corrosion-resistant 304 stainless steel for durability and dependability. Suitable for diverse industrial applications such as vibration, high pressure or corrosive conditions. For improved sealing and reduced galling* the manufacturer recommends using both Gray Stainless Steel PTFE Thread Seal Tape and Weld-On White Seal Plus Mulit-purpose Pipe Joint Compound.
Stainless Steel Fitting Features
- 304 Stainless Steel
- 300 PSI rating (-20° to 150° F)
- Class 150
110.00 EGP
نبل قلاووظ استانلس 316 1/2 بوصة ج 40
316 S.S Threaded Nipple 1/2 Inch SCH 40
SKU: N-014-316-1Stainless Steel Pipe Fittings
Stainless steel fittings are made of corrosion-resistant 304 stainless steel for durability and dependability. Suitable for diverse industrial applications such as vibration, high pressure or corrosive conditions. For improved sealing and reduced galling* the manufacturer recommends using both Gray Stainless Steel PTFE Thread Seal Tape and Weld-On White Seal Plus Mulit-purpose Pipe Joint Compound.
Stainless Steel Fitting Features
- 304 Stainless Steel
- 300 PSI rating (-20° to 150° F)
- Class 150
10 * 40 Aluminum 7050 Flat Bar
خوصة الومنيوم 7050 10×40
SKU: Al02970504010Aluminum Sheet 1050 10 mm1×2 m
– الواح الومنيوم م10mm1×2 مم
لوح الومنيوم بيور كود ١٠٥٠ نجع حمادي
Aluminum Sheet 1050 15 mm1×2 m
– الواح الومنيوم م15mm1×2 مم
لوح الومنيوم بيور كود ١٠٥٠ نجع حمادي
لوح استانلس استيل ميرور 201 مط 1.25مم ×1.25×2.5م
SS 201 Mirror 1.25×2.5m×1.25mmStainless steel grade 201 is a mid-range product typically found in appliances, cookware, sinks, kitchen utensils, and food service equipment. It is also found in automotive parts and clamps as well as railroad cars, and window trim. Its structural integrity and makeup make it ideal for uses in these industries. It tends to not be a good choice, however, for outdoor structural use, because it is susceptible to pitting and crevice corrosion from certain elements like salt water.
ماسورة لميع استانلس 316 سيمليس 8مم سمك1مم
316 SS Round Seamlles Tube Mirror OD 8 W 1mm 6m
Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
مسمار صلب 8.8 سمك 20مم * 70 مم
BOLT 8.8 20mm*70mm
مسمار صلب درجة الصلابة 8.8 مقاسات متنوعة وبضاعة حاضرة خصم خاص للكميات
فلانشة استانلس برقبة ٣١٦ ج ٤٠ مقاس 16بوصة #150
SS Flange Wn 316 #150 sch 40 16 inch
Weld neck flanges are used in applications where the conditions are severe and critical. Some of these conditions include high pressure, wide fluctuations in temperature and pressure, high temperature, fluids that are volatile and hazardous, and temperatures in the sub-zero range.
Weld neck flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.
During a dimensional inspection of weld neck flange, you should check for
- Outer & Inner Diameter of body
- Bolt Circle & Bolt hole Diameter
- the thickness of weld end
- Length of the Hub and
- Straightness and alignment of the bolt hole
لوح استانلس استيل 316 مط بدون غلاف بارد 1.5*3 سمك 10مم S S sheet cold matte uncovered 316 1.5*3 m×10mm
لوح 316 للاستخدمات الطبية والكيماوية
لوح استانلس استيل 316 مط بدون غلاف بارد 1.5*3 سمك 6مم
S S sheet cold matte uncovered 316 1.5*3 ×6m
لوح 316 للاستخدمات الطبية والكيماوية
لوح استانلس استيل 201 لميع 1مم ×1.22م×2.5م
SS 201 Mirror k9 1.22×2.5m×1mmالواح لامع استيراد 1.22*2.44م سمك ١مم ويتوافر 0.6مم 0.8مم مناسبة لاعمال الديكور والانشاءات المختلفة
استانليس 304 مواسير عدلة مدور لميع لحام 4مم 0.45مم
304 SS Round AW Tube Mirror OD 4 mm 0.45
Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
استانليس 304 مواسير عدلة مدور لميع لحام 3مم 0.45مم
304 SS Round AW Tube Mirror OD 3 mm 0.45 mm
Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
استانليس 304 مواسير عدلة مدور لميع لحام 5مم 0.45مم
304 SS Round AW Tube Mirror OD 5 mm 0.5 mm
Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
لوح استانلس استيل 304 مط بدون غلاف بارد 1.5* 3م 5مم
SS 304 Sheet Cold Matte Uncovered 5 mm 1.5* 3 m
ASTM A240 Type 304 Plate, AISI 304 Ring
Stainless Steel 304 Sheet is made up of an austenitic stainless steel that has 18% chromium and 8% nickel in the composition. This is the most used grade of all stainless steels in the world. The sheets are strong, mild corrosion resistant and have applications in a variety of industries. The Stainless Steel 304 Sheet also has manganese, carbon, silicon, sulfur, nitrogen and phosphorus in the composition. The material is strong and has 205MPa minimum yield strength and 515MPa minimum tensile strength in general
لاكور استانلس ٣١٦ قلاووظ مقاس ١ بوصة
SKU: 0143161UALU PIPE 6060 SIZE 60mm OD X 10mmW 1M
SPECIFICATIONS:
6061-T6; 6063-T6; ASTM B429
FINISH:
Extruded Mill Finish, Not Polished
CHARACTERISTICS:
Welding = Excellent
Machining / Grinding = Good
Bending / Forming = Fair
Wear Resistance = Fair
Corrosion Resistance = Good
MECHANICAL PROPERTIES:
Tensile Strength = 27 ksi (6063); 45 ksi (6061)
Yield Strength = 21 ksi (6063); 40 ksi (6061)
Elongation in 2″ = 18% (6063); 17% (6061)
Brinell Hardness = 60 (6063); 95 (6061)
*Data provided for reference only
AVAILABLE LENGTHS:
2ft, 4ft, 6ft, 8ft, 10ft, 20ft, or Custom Cut
Standard Length Tolerance = +/- 1/4″
Custom Cut Tolerance = +/- 1/16″
HOW TO MEASURE:
Nominal ID (A) X Schedule (wall) (B) X Length
* Dimensions in Inches
نبل قلاووظ استانلس 316 3/4 بوصة ج 40
316 S.S Threaded Nipple 3/4 Inch SCH 40
Stainless Steel Pipe Fittings
Stainless steel fittings are made of corrosion-resistant 304 stainless steel for durability and dependability. Suitable for diverse industrial applications such as vibration, high pressure or corrosive conditions. For improved sealing and reduced galling* the manufacturer recommends using both Gray Stainless Steel PTFE Thread Seal Tape and Weld-On White Seal Plus Mulit-purpose Pipe Joint Compound.
Stainless Steel Fitting Features
- 304 Stainless Steel
- 300 PSI rating (-20° to 150° F)
- Class 150
نبل قلاووظ استانلس 316 1/2 بوصة ج 40
316 S.S Threaded Nipple 1/2 Inch SCH 40
Stainless Steel Pipe Fittings
Stainless steel fittings are made of corrosion-resistant 304 stainless steel for durability and dependability. Suitable for diverse industrial applications such as vibration, high pressure or corrosive conditions. For improved sealing and reduced galling* the manufacturer recommends using both Gray Stainless Steel PTFE Thread Seal Tape and Weld-On White Seal Plus Mulit-purpose Pipe Joint Compound.
Stainless Steel Fitting Features
- 304 Stainless Steel
- 300 PSI rating (-20° to 150° F)
- Class 150
Aluminum Sheet 1050 10 mm1×2 m
– الواح الومنيوم م10mm1×2 مم
لوح الومنيوم بيور كود ١٠٥٠ نجع حمادي
Aluminum Sheet 1050 15 mm1×2 m
– الواح الومنيوم م15mm1×2 مم
لوح الومنيوم بيور كود ١٠٥٠ نجع حمادي
لوح استانلس استيل ميرور 201 مط 1.25مم ×1.25×2.5م
SS 201 Mirror 1.25×2.5m×1.25mmStainless steel grade 201 is a mid-range product typically found in appliances, cookware, sinks, kitchen utensils, and food service equipment. It is also found in automotive parts and clamps as well as railroad cars, and window trim. Its structural integrity and makeup make it ideal for uses in these industries. It tends to not be a good choice, however, for outdoor structural use, because it is susceptible to pitting and crevice corrosion from certain elements like salt water.
ماسورة لميع استانلس 316 سيمليس 8مم سمك1مم
316 SS Round Seamlles Tube Mirror OD 8 W 1mm 6m
Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
مسمار صلب 8.8 سمك 20مم * 70 مم
BOLT 8.8 20mm*70mm
مسمار صلب درجة الصلابة 8.8 مقاسات متنوعة وبضاعة حاضرة خصم خاص للكميات
فلانشة استانلس برقبة ٣١٦ ج ٤٠ مقاس 16بوصة #150
SS Flange Wn 316 #150 sch 40 16 inch
Weld neck flanges are used in applications where the conditions are severe and critical. Some of these conditions include high pressure, wide fluctuations in temperature and pressure, high temperature, fluids that are volatile and hazardous, and temperatures in the sub-zero range.
Weld neck flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.
During a dimensional inspection of weld neck flange, you should check for
- Outer & Inner Diameter of body
- Bolt Circle & Bolt hole Diameter
- the thickness of weld end
- Length of the Hub and
- Straightness and alignment of the bolt hole
لوح استانلس استيل 316 مط بدون غلاف بارد 1.5*3 سمك 10مم S S sheet cold matte uncovered 316 1.5*3 m×10mm
لوح 316 للاستخدمات الطبية والكيماوية
لوح استانلس استيل 316 مط بدون غلاف بارد 1.5*3 سمك 6مم
S S sheet cold matte uncovered 316 1.5*3 ×6m
لوح 316 للاستخدمات الطبية والكيماوية
لوح استانلس استيل 201 لميع 1مم ×1.22م×2.5م
SS 201 Mirror k9 1.22×2.5m×1mmالواح لامع استيراد 1.22*2.44م سمك ١مم ويتوافر 0.6مم 0.8مم مناسبة لاعمال الديكور والانشاءات المختلفة
استانليس 304 مواسير عدلة مدور لميع لحام 4مم 0.45مم
304 SS Round AW Tube Mirror OD 4 mm 0.45
Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
استانليس 304 مواسير عدلة مدور لميع لحام 3مم 0.45مم
304 SS Round AW Tube Mirror OD 3 mm 0.45 mm
Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
استانليس 304 مواسير عدلة مدور لميع لحام 5مم 0.45مم
304 SS Round AW Tube Mirror OD 5 mm 0.5 mm
Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
مادة فينش ياباني
Nichia staincleen 2kg
مادة فينش ياباني لتظيف وتلميع الاستانلس استيل
لوح استانلس استيل 304 مط بدون غلاف بارد 1.5* 3م 5مم
SS 304 Sheet Cold Matte Uncovered 5 mm 1.5* 3 m
ASTM A240 Type 304 Plate, AISI 304 Ring
Stainless Steel 304 Sheet is made up of an austenitic stainless steel that has 18% chromium and 8% nickel in the composition. This is the most used grade of all stainless steels in the world. The sheets are strong, mild corrosion resistant and have applications in a variety of industries. The Stainless Steel 304 Sheet also has manganese, carbon, silicon, sulfur, nitrogen and phosphorus in the composition. The material is strong and has 205MPa minimum yield strength and 515MPa minimum tensile strength in general
ALU PIPE 6060 SIZE 60mm OD X 10mmW 1M
SPECIFICATIONS:
6061-T6; 6063-T6; ASTM B429
FINISH:
Extruded Mill Finish, Not Polished
CHARACTERISTICS:
Welding = Excellent
Machining / Grinding = Good
Bending / Forming = Fair
Wear Resistance = Fair
Corrosion Resistance = Good
MECHANICAL PROPERTIES:
Tensile Strength = 27 ksi (6063); 45 ksi (6061)
Yield Strength = 21 ksi (6063); 40 ksi (6061)
Elongation in 2″ = 18% (6063); 17% (6061)
Brinell Hardness = 60 (6063); 95 (6061)
*Data provided for reference only
AVAILABLE LENGTHS:
2ft, 4ft, 6ft, 8ft, 10ft, 20ft, or Custom Cut
Standard Length Tolerance = +/- 1/4″
Custom Cut Tolerance = +/- 1/16″
HOW TO MEASURE:
Nominal ID (A) X Schedule (wall) (B) X Length
* Dimensions in Inches
نبل قلاووظ استانلس 316 3/4 بوصة ج 40
316 S.S Threaded Nipple 3/4 Inch SCH 40
Stainless Steel Pipe Fittings
Stainless steel fittings are made of corrosion-resistant 304 stainless steel for durability and dependability. Suitable for diverse industrial applications such as vibration, high pressure or corrosive conditions. For improved sealing and reduced galling* the manufacturer recommends using both Gray Stainless Steel PTFE Thread Seal Tape and Weld-On White Seal Plus Mulit-purpose Pipe Joint Compound.
Stainless Steel Fitting Features
- 304 Stainless Steel
- 300 PSI rating (-20° to 150° F)
- Class 150
نبل قلاووظ استانلس 316 1/2 بوصة ج 40
316 S.S Threaded Nipple 1/2 Inch SCH 40
Stainless Steel Pipe Fittings
Stainless steel fittings are made of corrosion-resistant 304 stainless steel for durability and dependability. Suitable for diverse industrial applications such as vibration, high pressure or corrosive conditions. For improved sealing and reduced galling* the manufacturer recommends using both Gray Stainless Steel PTFE Thread Seal Tape and Weld-On White Seal Plus Mulit-purpose Pipe Joint Compound.
Stainless Steel Fitting Features
- 304 Stainless Steel
- 300 PSI rating (-20° to 150° F)
- Class 150
Aluminum Sheet 1050 10 mm1×2 m
– الواح الومنيوم م10mm1×2 مم
لوح الومنيوم بيور كود ١٠٥٠ نجع حمادي
Aluminum Sheet 1050 15 mm1×2 m
– الواح الومنيوم م15mm1×2 مم
لوح الومنيوم بيور كود ١٠٥٠ نجع حمادي
لوح استانلس استيل ميرور 201 مط 1.25مم ×1.25×2.5م
SS 201 Mirror 1.25×2.5m×1.25mmStainless steel grade 201 is a mid-range product typically found in appliances, cookware, sinks, kitchen utensils, and food service equipment. It is also found in automotive parts and clamps as well as railroad cars, and window trim. Its structural integrity and makeup make it ideal for uses in these industries. It tends to not be a good choice, however, for outdoor structural use, because it is susceptible to pitting and crevice corrosion from certain elements like salt water.
ماسورة لميع استانلس 316 سيمليس 8مم سمك1مم
316 SS Round Seamlles Tube Mirror OD 8 W 1mm 6m
Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
مسمار صلب 8.8 سمك 20مم * 70 مم
BOLT 8.8 20mm*70mm
مسمار صلب درجة الصلابة 8.8 مقاسات متنوعة وبضاعة حاضرة خصم خاص للكميات
فلانشة استانلس برقبة ٣١٦ ج ٤٠ مقاس 16بوصة #150
SS Flange Wn 316 #150 sch 40 16 inch
Weld neck flanges are used in applications where the conditions are severe and critical. Some of these conditions include high pressure, wide fluctuations in temperature and pressure, high temperature, fluids that are volatile and hazardous, and temperatures in the sub-zero range.
Weld neck flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.
During a dimensional inspection of weld neck flange, you should check for
- Outer & Inner Diameter of body
- Bolt Circle & Bolt hole Diameter
- the thickness of weld end
- Length of the Hub and
- Straightness and alignment of the bolt hole
لوح استانلس استيل 316 مط بدون غلاف بارد 1.5*3 سمك 10مم S S sheet cold matte uncovered 316 1.5*3 m×10mm
لوح 316 للاستخدمات الطبية والكيماوية
لوح استانلس استيل 316 مط بدون غلاف بارد 1.5*3 سمك 6مم
S S sheet cold matte uncovered 316 1.5*3 ×6m
لوح 316 للاستخدمات الطبية والكيماوية
لوح استانلس استيل 201 لميع 1مم ×1.22م×2.5م
SS 201 Mirror k9 1.22×2.5m×1mmالواح لامع استيراد 1.22*2.44م سمك ١مم ويتوافر 0.6مم 0.8مم مناسبة لاعمال الديكور والانشاءات المختلفة
استانليس 304 مواسير عدلة مدور لميع لحام 4مم 0.45مم
304 SS Round AW Tube Mirror OD 4 mm 0.45
Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
استانليس 304 مواسير عدلة مدور لميع لحام 3مم 0.45مم
304 SS Round AW Tube Mirror OD 3 mm 0.45 mm
Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
استانليس 304 مواسير عدلة مدور لميع لحام 5مم 0.45مم
304 SS Round AW Tube Mirror OD 5 mm 0.5 mm
Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
مادة فينش ياباني
Nichia staincleen 2kg
مادة فينش ياباني لتظيف وتلميع الاستانلس استيل
لوح استانلس استيل 304 مط بدون غلاف بارد 1.5* 3م 5مم
SS 304 Sheet Cold Matte Uncovered 5 mm 1.5* 3 m
ASTM A240 Type 304 Plate, AISI 304 Ring
Stainless Steel 304 Sheet is made up of an austenitic stainless steel that has 18% chromium and 8% nickel in the composition. This is the most used grade of all stainless steels in the world. The sheets are strong, mild corrosion resistant and have applications in a variety of industries. The Stainless Steel 304 Sheet also has manganese, carbon, silicon, sulfur, nitrogen and phosphorus in the composition. The material is strong and has 205MPa minimum yield strength and 515MPa minimum tensile strength in general
ALU PIPE 6060 SIZE 60mm OD X 10mmW 1M
SPECIFICATIONS:
6061-T6; 6063-T6; ASTM B429
FINISH:
Extruded Mill Finish, Not Polished
CHARACTERISTICS:
Welding = Excellent
Machining / Grinding = Good
Bending / Forming = Fair
Wear Resistance = Fair
Corrosion Resistance = Good
MECHANICAL PROPERTIES:
Tensile Strength = 27 ksi (6063); 45 ksi (6061)
Yield Strength = 21 ksi (6063); 40 ksi (6061)
Elongation in 2″ = 18% (6063); 17% (6061)
Brinell Hardness = 60 (6063); 95 (6061)
*Data provided for reference only
AVAILABLE LENGTHS:
2ft, 4ft, 6ft, 8ft, 10ft, 20ft, or Custom Cut
Standard Length Tolerance = +/- 1/4″
Custom Cut Tolerance = +/- 1/16″
HOW TO MEASURE:
Nominal ID (A) X Schedule (wall) (B) X Length
* Dimensions in Inches
نبل قلاووظ استانلس 316 3/4 بوصة ج 40
316 S.S Threaded Nipple 3/4 Inch SCH 40
Stainless Steel Pipe Fittings
Stainless steel fittings are made of corrosion-resistant 304 stainless steel for durability and dependability. Suitable for diverse industrial applications such as vibration, high pressure or corrosive conditions. For improved sealing and reduced galling* the manufacturer recommends using both Gray Stainless Steel PTFE Thread Seal Tape and Weld-On White Seal Plus Mulit-purpose Pipe Joint Compound.
Stainless Steel Fitting Features
- 304 Stainless Steel
- 300 PSI rating (-20° to 150° F)
- Class 150
نبل قلاووظ استانلس 316 1/2 بوصة ج 40
316 S.S Threaded Nipple 1/2 Inch SCH 40
Stainless Steel Pipe Fittings
Stainless steel fittings are made of corrosion-resistant 304 stainless steel for durability and dependability. Suitable for diverse industrial applications such as vibration, high pressure or corrosive conditions. For improved sealing and reduced galling* the manufacturer recommends using both Gray Stainless Steel PTFE Thread Seal Tape and Weld-On White Seal Plus Mulit-purpose Pipe Joint Compound.
Stainless Steel Fitting Features
- 304 Stainless Steel
- 300 PSI rating (-20° to 150° F)
- Class 150