المجموع: 750.00 EGP
110.00 EGP
بالتة حديد 30*30سم سمك 5مم
Steel Plate 30cm*30cm T 3mm
SKU: 020135203-1بالتة حديد تقطيع بالطلب المسبق توريد فورا لاعمال التثبيت
1.00 EGP
Square Steel Tube 50*50*3 mm
ماسورة مربعه(علبة) حديد 5سم *5سم سمك 3مم
SKU: 02350503Square Steel Tube is a welded structural grade tubing that is available in either type A513 or A500 Grade B, depending on it’s size and wall thickness. Either grade is ideal for all structural applications, general fabrication, manufacturing and repairs. Steel Square Tube is widely used in industrial maintenance, agricultural implements, transportation equipment, truck beds, trailers, frames, etc. It’s box-shape configuration allows for much greater strength and rigidity compared to angles or channels. This steel shape is easy to weld, cut, form and machine with the proper equipment and knowledge.
3.600.00 EGP
“1 Pneumatic Stainless Steel Angle Seat Threaded End Valve
SKU: N/AStainless steel angle seat valves
View our wide range of stainless steel pneumatic angle seat valves. Angle seat valves are designed to have the valve seat placed at an angle in a Y-shape, which is advantageous because it allows the medium to flow through relatively easily (few bends) for minimal flow and pressure loss. They have better flow characteristics than vertical globe valves. It operates by having a spindle move in a linear motion by an air-operated piston to move the seal towards or away from the valve seat. This seal is usually PTFE (teflon) and the valve housing is stainless steel. Angle seat valves are reliable, durable, require low maintenance and are characterized by a long lifespan with millions of cycles. They can be used in applications for gases, vacuum or (viscous) liquids and offer a seal in both in and out directions. Other names for these valves are shut-off valves, Y-valves or angle seat piston valves. The valve generally closes in the same direction as the flow direction. There are special versions where the valve closes against the flow direction, in order to reduce the risk of water hammer.
<
p dir="ltr">
125.00 EGP
فرشة سلك استانلس الماني ٦سم باكس ٣٠٤ 304 p> SS wire brush axe 6 cm>
SKU: N/Aإضافة إلى السلة
1.150.00 EGP
فلانشة304 استانلس 6بوصة سمك 15مم < 15× p> SS Flange 304 6 Inch
SKU: 014304F615فلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤
550.00 EGP
فلانشة 304 استانلس استيل 4 بوصة سمك 10مم
304 SS Flange 4 Inch Thin 10 mm
SKU: 014304F415فلانشات استانلس استيل مواصفات مختلفة 304-316-321-310- استيراد وتصنيع عامية ومخرمة ومقلوظة وبرقبة وبشفة ومسلوبة ,وثابتة ومتحركة ….الخ باختلاف الجداول والضغوط والpn مقاسات من 3/8 بوصة الى 24 بوصة مع امكانية تصنيع وتخريم الفلانشات والطبب بمقاساتكم المختلفة من اي سمك بلازما او نظيفة بجودةعالية بمخارط وفرايز cnc
750.00 EGP
فلانشة 304 استانلس استيل 3 بوصة سمك 15مم
304 SS Flange 3Inch Thin 15mm
SKU: 014304F315فلانشة استانلس ٣٠٤ تصنيع محلي خامه اوروبيه امريكية او المانيه او هندية حسب المتوفر السمك ١٥ بالطلب ويوجد الي ٣٠مم واقل شيء بالطلب ٨مم او١٠ او١٢
19.740.00 EGP
فلانشة استانلس برقبة ٣١٦ ج ٤٠ مقاس ١٠ بوصة #٣٠٠
SS Flange Wn 316 #300 sch 40 10 inch
SKU: N/AWeld neck flanges are used in applications where the conditions are severe and critical. Some of these conditions include high pressure, wide fluctuations in temperature and pressure, high temperature, fluids that are volatile and hazardous, and temperatures in the sub-zero range.
Weld neck flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.
During a dimensional inspection of weld neck flange, you should check for
- Outer & Inner Diameter of body
- Bolt Circle & Bolt hole Diameter
- the thickness of weld end
- Length of the Hub and
- Straightness and alignment of the bolt hole
1.00 EGP
Brass Hex Bar from 20 to50 mm
– نحاس اصفر عمدان مسدسه مقاس 20الي 50مم)
SKU: 0502360size-1عمدان مسدس مسمطة اسياخ نحاس اصفر جودة عالية مقاسات مختلفة
9.000.00 EGP
Carbon Steel ASTM A106 Pipes Seamless 8 Inch Sch40 6 m China
ماسورة كاربون استيل 8 بوصة ج40 طول 6م صيني
SKU: 23401068ASTM A106 is for Seamless Carbon Steel Pipe for High-Temperature Service
This specification covers carbon steel pipe for high-temperature service. These pipes are suitable for welding, bending, flanging, and similar forming operations. Mechanical testing of the specimens shall include tensile, bending, flattening, hydrostatic and nondestructive electric tests. Specimens undergoing bending tests shall consist of sections cut from a pipe. For flattening tests, the specimens shall be smooth on the ends and burr-free, except when made on crop ends. All tests shall be performed in room temperature. If any test specimen shows flaws it can be discarded and substituted for another test specimen. Before testing, if a specimen has scribe scratches, a retest shall be allowed. A retest shall also be allowed if a specimen breaks in an inside or outside surface flaw.
2.000.00 EGP
Carbon Steel ASTM A106 Pipes Seamless 3 Inch Sch 40 6 m
ماسورة كاربون استيل3 بوصةج40 طول 6م
SKU: 23401063إضافة إلى السلة
145.00 EGP
كوع كاربون استيل 3 بوصة
Carbon Steel Elbow 3 Inch
SKU: 24106340Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
50.00 EGP
كوع كاربون استيل 4 بوصة
Carbon Steel Elbow 4 Inch
SKU: 24106440Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
1.000.00 EGP
تية مسلوب كاربون استيل 10\4 بوصة –
Unequal Carbon Steel Tee 4\10 inch
SKU: 024106104tإضافة إلى السلة
4.000.00 EGP
تية كاربون استيل عدل 10 بوصة
Equal Tee Carbon Steel 10 inch
SKU: 0241061040TCarbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
3.250.00 EGP
كوع كاربون ستيل سيملس 10 ج40
SKU: 241061040Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
17.500.00 EGP
Steem Globe Valve 8 Inch Carbon Steel -محبس جلوب بخار بالفلانشات كاربون استيل 8 بوصة بولاندي
SKU: N/AGlobe valves are linear motion closing-down valves in which the closure member is moved squarely on and off the seat. Usually the closure member is referred as a disc, irrespective of its shape. The seat opening varies in direct proportion to the travel of the disc. This proportional relationship between valve opening and disc travel is ideally suited for duties involving regulation of flow rate. Globe valves are most suitable for throttling and controlling fluid flow and are generally employed in small size piping
400.00 EGP
كوع كاربون استيل 6 بوصة
Carbon Steel Elbow 6 Inch
SKU: 2106640Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
400.00 EGP
كوع البان لحام استانلس استيل 316 90°DN80
Stainless Sanitary Weld Elbow 90° DN80
SKU: 014-316EDn65Sanitary Weld Elbow
Sanitary Weld Elbow is in the process system to change the fluid direction, it is a very important sanitary fittings to the installation. Sanitary weld elbow is made in material stainless steel 304 and 316 or specified grade, with the advantage of high cleanliness surface and corrosion resistance. Wellgreen offers sanitary welding fittings through 1/2” to 12” with standard 3A, DIN, SMS, BS, ISO, IDF, DS, BPF, I-Line etc, also we are ability to offer customized weld elbow and bend.
بالتة حديد 30*30سم سمك 5مم
Steel Plate 30cm*30cm T 3mm
بالتة حديد تقطيع بالطلب المسبق توريد فورا لاعمال التثبيت
Square Steel Tube 50*50*3 mm
ماسورة مربعه(علبة) حديد 5سم *5سم سمك 3مم
Square Steel Tube is a welded structural grade tubing that is available in either type A513 or A500 Grade B, depending on it’s size and wall thickness. Either grade is ideal for all structural applications, general fabrication, manufacturing and repairs. Steel Square Tube is widely used in industrial maintenance, agricultural implements, transportation equipment, truck beds, trailers, frames, etc. It’s box-shape configuration allows for much greater strength and rigidity compared to angles or channels. This steel shape is easy to weld, cut, form and machine with the proper equipment and knowledge.
“1 Pneumatic Stainless Steel Angle Seat Threaded End Valve
Stainless steel angle seat valves
View our wide range of stainless steel pneumatic angle seat valves. Angle seat valves are designed to have the valve seat placed at an angle in a Y-shape, which is advantageous because it allows the medium to flow through relatively easily (few bends) for minimal flow and pressure loss. They have better flow characteristics than vertical globe valves. It operates by having a spindle move in a linear motion by an air-operated piston to move the seal towards or away from the valve seat. This seal is usually PTFE (teflon) and the valve housing is stainless steel. Angle seat valves are reliable, durable, require low maintenance and are characterized by a long lifespan with millions of cycles. They can be used in applications for gases, vacuum or (viscous) liquids and offer a seal in both in and out directions. Other names for these valves are shut-off valves, Y-valves or angle seat piston valves. The valve generally closes in the same direction as the flow direction. There are special versions where the valve closes against the flow direction, in order to reduce the risk of water hammer.
<
p dir="ltr">
فلانشة304 استانلس 6بوصة سمك 15مم < 15× p> SS Flange 304 6 Inch
فلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤
فلانشة 304 استانلس استيل 4 بوصة سمك 10مم
304 SS Flange 4 Inch Thin 10 mm
فلانشات استانلس استيل مواصفات مختلفة 304-316-321-310- استيراد وتصنيع عامية ومخرمة ومقلوظة وبرقبة وبشفة ومسلوبة ,وثابتة ومتحركة ….الخ باختلاف الجداول والضغوط والpn مقاسات من 3/8 بوصة الى 24 بوصة مع امكانية تصنيع وتخريم الفلانشات والطبب بمقاساتكم المختلفة من اي سمك بلازما او نظيفة بجودةعالية بمخارط وفرايز cnc
فلانشة 304 استانلس استيل 3 بوصة سمك 15مم
304 SS Flange 3Inch Thin 15mm
فلانشة استانلس ٣٠٤ تصنيع محلي خامه اوروبيه امريكية او المانيه او هندية حسب المتوفر السمك ١٥ بالطلب ويوجد الي ٣٠مم واقل شيء بالطلب ٨مم او١٠ او١٢
فلانشة استانلس برقبة ٣١٦ ج ٤٠ مقاس ١٠ بوصة #٣٠٠
SS Flange Wn 316 #300 sch 40 10 inch
Weld neck flanges are used in applications where the conditions are severe and critical. Some of these conditions include high pressure, wide fluctuations in temperature and pressure, high temperature, fluids that are volatile and hazardous, and temperatures in the sub-zero range.
Weld neck flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.
During a dimensional inspection of weld neck flange, you should check for
- Outer & Inner Diameter of body
- Bolt Circle & Bolt hole Diameter
- the thickness of weld end
- Length of the Hub and
- Straightness and alignment of the bolt hole
Brass Hex Bar from 20 to50 mm
– نحاس اصفر عمدان مسدسه مقاس 20الي 50مم)
عمدان مسدس مسمطة اسياخ نحاس اصفر جودة عالية مقاسات مختلفة
Carbon Steel ASTM A106 Pipes Seamless 8 Inch Sch40 6 m China
ماسورة كاربون استيل 8 بوصة ج40 طول 6م صيني
ASTM A106 is for Seamless Carbon Steel Pipe for High-Temperature Service
This specification covers carbon steel pipe for high-temperature service. These pipes are suitable for welding, bending, flanging, and similar forming operations. Mechanical testing of the specimens shall include tensile, bending, flattening, hydrostatic and nondestructive electric tests. Specimens undergoing bending tests shall consist of sections cut from a pipe. For flattening tests, the specimens shall be smooth on the ends and burr-free, except when made on crop ends. All tests shall be performed in room temperature. If any test specimen shows flaws it can be discarded and substituted for another test specimen. Before testing, if a specimen has scribe scratches, a retest shall be allowed. A retest shall also be allowed if a specimen breaks in an inside or outside surface flaw.
كوع كاربون استيل 3 بوصة
Carbon Steel Elbow 3 Inch
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
كوع كاربون استيل 4 بوصة
Carbon Steel Elbow 4 Inch
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
تية كاربون استيل عدل 10 بوصة
Equal Tee Carbon Steel 10 inch
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
كوع كاربون ستيل سيملس 10 ج40
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
Steem Globe Valve 8 Inch Carbon Steel -محبس جلوب بخار بالفلانشات كاربون استيل 8 بوصة بولاندي
Globe valves are linear motion closing-down valves in which the closure member is moved squarely on and off the seat. Usually the closure member is referred as a disc, irrespective of its shape. The seat opening varies in direct proportion to the travel of the disc. This proportional relationship between valve opening and disc travel is ideally suited for duties involving regulation of flow rate. Globe valves are most suitable for throttling and controlling fluid flow and are generally employed in small size piping
كوع كاربون استيل 6 بوصة
Carbon Steel Elbow 6 Inch
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
كوع البان لحام استانلس استيل 316 90°DN80
Stainless Sanitary Weld Elbow 90° DN80
Sanitary Weld Elbow
Sanitary Weld Elbow is in the process system to change the fluid direction, it is a very important sanitary fittings to the installation. Sanitary weld elbow is made in material stainless steel 304 and 316 or specified grade, with the advantage of high cleanliness surface and corrosion resistance. Wellgreen offers sanitary welding fittings through 1/2” to 12” with standard 3A, DIN, SMS, BS, ISO, IDF, DS, BPF, I-Line etc, also we are ability to offer customized weld elbow and bend.
بالتة حديد 30*30سم سمك 5مم
Steel Plate 30cm*30cm T 3mm
بالتة حديد تقطيع بالطلب المسبق توريد فورا لاعمال التثبيت
Square Steel Tube 50*50*3 mm
ماسورة مربعه(علبة) حديد 5سم *5سم سمك 3مم
Square Steel Tube is a welded structural grade tubing that is available in either type A513 or A500 Grade B, depending on it’s size and wall thickness. Either grade is ideal for all structural applications, general fabrication, manufacturing and repairs. Steel Square Tube is widely used in industrial maintenance, agricultural implements, transportation equipment, truck beds, trailers, frames, etc. It’s box-shape configuration allows for much greater strength and rigidity compared to angles or channels. This steel shape is easy to weld, cut, form and machine with the proper equipment and knowledge.
“1 Pneumatic Stainless Steel Angle Seat Threaded End Valve
Stainless steel angle seat valves
View our wide range of stainless steel pneumatic angle seat valves. Angle seat valves are designed to have the valve seat placed at an angle in a Y-shape, which is advantageous because it allows the medium to flow through relatively easily (few bends) for minimal flow and pressure loss. They have better flow characteristics than vertical globe valves. It operates by having a spindle move in a linear motion by an air-operated piston to move the seal towards or away from the valve seat. This seal is usually PTFE (teflon) and the valve housing is stainless steel. Angle seat valves are reliable, durable, require low maintenance and are characterized by a long lifespan with millions of cycles. They can be used in applications for gases, vacuum or (viscous) liquids and offer a seal in both in and out directions. Other names for these valves are shut-off valves, Y-valves or angle seat piston valves. The valve generally closes in the same direction as the flow direction. There are special versions where the valve closes against the flow direction, in order to reduce the risk of water hammer.
<
p dir="ltr">
فلانشة304 استانلس 6بوصة سمك 15مم < 15× p> SS Flange 304 6 Inch
فلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤
فلانشة 304 استانلس استيل 4 بوصة سمك 10مم
304 SS Flange 4 Inch Thin 10 mm
فلانشات استانلس استيل مواصفات مختلفة 304-316-321-310- استيراد وتصنيع عامية ومخرمة ومقلوظة وبرقبة وبشفة ومسلوبة ,وثابتة ومتحركة ….الخ باختلاف الجداول والضغوط والpn مقاسات من 3/8 بوصة الى 24 بوصة مع امكانية تصنيع وتخريم الفلانشات والطبب بمقاساتكم المختلفة من اي سمك بلازما او نظيفة بجودةعالية بمخارط وفرايز cnc
فلانشة 304 استانلس استيل 3 بوصة سمك 15مم
304 SS Flange 3Inch Thin 15mm
فلانشة استانلس ٣٠٤ تصنيع محلي خامه اوروبيه امريكية او المانيه او هندية حسب المتوفر السمك ١٥ بالطلب ويوجد الي ٣٠مم واقل شيء بالطلب ٨مم او١٠ او١٢
فلانشة استانلس برقبة ٣١٦ ج ٤٠ مقاس ١٠ بوصة #٣٠٠
SS Flange Wn 316 #300 sch 40 10 inch
Weld neck flanges are used in applications where the conditions are severe and critical. Some of these conditions include high pressure, wide fluctuations in temperature and pressure, high temperature, fluids that are volatile and hazardous, and temperatures in the sub-zero range.
Weld neck flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.
During a dimensional inspection of weld neck flange, you should check for
- Outer & Inner Diameter of body
- Bolt Circle & Bolt hole Diameter
- the thickness of weld end
- Length of the Hub and
- Straightness and alignment of the bolt hole
Brass Hex Bar from 20 to50 mm
– نحاس اصفر عمدان مسدسه مقاس 20الي 50مم)
عمدان مسدس مسمطة اسياخ نحاس اصفر جودة عالية مقاسات مختلفة
Carbon Steel ASTM A106 Pipes Seamless 8 Inch Sch40 6 m China
ماسورة كاربون استيل 8 بوصة ج40 طول 6م صيني
ASTM A106 is for Seamless Carbon Steel Pipe for High-Temperature Service
This specification covers carbon steel pipe for high-temperature service. These pipes are suitable for welding, bending, flanging, and similar forming operations. Mechanical testing of the specimens shall include tensile, bending, flattening, hydrostatic and nondestructive electric tests. Specimens undergoing bending tests shall consist of sections cut from a pipe. For flattening tests, the specimens shall be smooth on the ends and burr-free, except when made on crop ends. All tests shall be performed in room temperature. If any test specimen shows flaws it can be discarded and substituted for another test specimen. Before testing, if a specimen has scribe scratches, a retest shall be allowed. A retest shall also be allowed if a specimen breaks in an inside or outside surface flaw.
كوع كاربون استيل 3 بوصة
Carbon Steel Elbow 3 Inch
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
كوع كاربون استيل 4 بوصة
Carbon Steel Elbow 4 Inch
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
تية كاربون استيل عدل 10 بوصة
Equal Tee Carbon Steel 10 inch
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
كوع كاربون ستيل سيملس 10 ج40
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
Steem Globe Valve 8 Inch Carbon Steel -محبس جلوب بخار بالفلانشات كاربون استيل 8 بوصة بولاندي
Globe valves are linear motion closing-down valves in which the closure member is moved squarely on and off the seat. Usually the closure member is referred as a disc, irrespective of its shape. The seat opening varies in direct proportion to the travel of the disc. This proportional relationship between valve opening and disc travel is ideally suited for duties involving regulation of flow rate. Globe valves are most suitable for throttling and controlling fluid flow and are generally employed in small size piping
كوع كاربون استيل 6 بوصة
Carbon Steel Elbow 6 Inch
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
كوع البان لحام استانلس استيل 316 90°DN80
Stainless Sanitary Weld Elbow 90° DN80
Sanitary Weld Elbow
Sanitary Weld Elbow is in the process system to change the fluid direction, it is a very important sanitary fittings to the installation. Sanitary weld elbow is made in material stainless steel 304 and 316 or specified grade, with the advantage of high cleanliness surface and corrosion resistance. Wellgreen offers sanitary welding fittings through 1/2” to 12” with standard 3A, DIN, SMS, BS, ISO, IDF, DS, BPF, I-Line etc, also we are ability to offer customized weld elbow and bend.
بالتة حديد 30*30سم سمك 5مم
Steel Plate 30cm*30cm T 3mm
بالتة حديد تقطيع بالطلب المسبق توريد فورا لاعمال التثبيت
Square Steel Tube 50*50*3 mm
ماسورة مربعه(علبة) حديد 5سم *5سم سمك 3مم
Square Steel Tube is a welded structural grade tubing that is available in either type A513 or A500 Grade B, depending on it’s size and wall thickness. Either grade is ideal for all structural applications, general fabrication, manufacturing and repairs. Steel Square Tube is widely used in industrial maintenance, agricultural implements, transportation equipment, truck beds, trailers, frames, etc. It’s box-shape configuration allows for much greater strength and rigidity compared to angles or channels. This steel shape is easy to weld, cut, form and machine with the proper equipment and knowledge.
“1 Pneumatic Stainless Steel Angle Seat Threaded End Valve
Stainless steel angle seat valves
View our wide range of stainless steel pneumatic angle seat valves. Angle seat valves are designed to have the valve seat placed at an angle in a Y-shape, which is advantageous because it allows the medium to flow through relatively easily (few bends) for minimal flow and pressure loss. They have better flow characteristics than vertical globe valves. It operates by having a spindle move in a linear motion by an air-operated piston to move the seal towards or away from the valve seat. This seal is usually PTFE (teflon) and the valve housing is stainless steel. Angle seat valves are reliable, durable, require low maintenance and are characterized by a long lifespan with millions of cycles. They can be used in applications for gases, vacuum or (viscous) liquids and offer a seal in both in and out directions. Other names for these valves are shut-off valves, Y-valves or angle seat piston valves. The valve generally closes in the same direction as the flow direction. There are special versions where the valve closes against the flow direction, in order to reduce the risk of water hammer.
<
p dir="ltr">
فلانشة304 استانلس 6بوصة سمك 15مم < 15× p> SS Flange 304 6 Inch
فلانشة ٦ سمك ١٥ مم تصنيع استاندر خامه اوروبي اسباني والماني مخرمة مواصفه ٣٠٤
فلانشة 304 استانلس استيل 4 بوصة سمك 10مم
304 SS Flange 4 Inch Thin 10 mm
فلانشات استانلس استيل مواصفات مختلفة 304-316-321-310- استيراد وتصنيع عامية ومخرمة ومقلوظة وبرقبة وبشفة ومسلوبة ,وثابتة ومتحركة ….الخ باختلاف الجداول والضغوط والpn مقاسات من 3/8 بوصة الى 24 بوصة مع امكانية تصنيع وتخريم الفلانشات والطبب بمقاساتكم المختلفة من اي سمك بلازما او نظيفة بجودةعالية بمخارط وفرايز cnc
فلانشة 304 استانلس استيل 3 بوصة سمك 15مم
304 SS Flange 3Inch Thin 15mm
فلانشة استانلس ٣٠٤ تصنيع محلي خامه اوروبيه امريكية او المانيه او هندية حسب المتوفر السمك ١٥ بالطلب ويوجد الي ٣٠مم واقل شيء بالطلب ٨مم او١٠ او١٢
فلانشة استانلس برقبة ٣١٦ ج ٤٠ مقاس ١٠ بوصة #٣٠٠
SS Flange Wn 316 #300 sch 40 10 inch
Weld neck flanges are used in applications where the conditions are severe and critical. Some of these conditions include high pressure, wide fluctuations in temperature and pressure, high temperature, fluids that are volatile and hazardous, and temperatures in the sub-zero range.
Weld neck flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.
During a dimensional inspection of weld neck flange, you should check for
- Outer & Inner Diameter of body
- Bolt Circle & Bolt hole Diameter
- the thickness of weld end
- Length of the Hub and
- Straightness and alignment of the bolt hole
Brass Hex Bar from 20 to50 mm
– نحاس اصفر عمدان مسدسه مقاس 20الي 50مم)
عمدان مسدس مسمطة اسياخ نحاس اصفر جودة عالية مقاسات مختلفة
Carbon Steel ASTM A106 Pipes Seamless 8 Inch Sch40 6 m China
ماسورة كاربون استيل 8 بوصة ج40 طول 6م صيني
ASTM A106 is for Seamless Carbon Steel Pipe for High-Temperature Service
This specification covers carbon steel pipe for high-temperature service. These pipes are suitable for welding, bending, flanging, and similar forming operations. Mechanical testing of the specimens shall include tensile, bending, flattening, hydrostatic and nondestructive electric tests. Specimens undergoing bending tests shall consist of sections cut from a pipe. For flattening tests, the specimens shall be smooth on the ends and burr-free, except when made on crop ends. All tests shall be performed in room temperature. If any test specimen shows flaws it can be discarded and substituted for another test specimen. Before testing, if a specimen has scribe scratches, a retest shall be allowed. A retest shall also be allowed if a specimen breaks in an inside or outside surface flaw.
كوع كاربون استيل 3 بوصة
Carbon Steel Elbow 3 Inch
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
كوع كاربون استيل 4 بوصة
Carbon Steel Elbow 4 Inch
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
تية كاربون استيل عدل 10 بوصة
Equal Tee Carbon Steel 10 inch
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
كوع كاربون ستيل سيملس 10 ج40
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
Steem Globe Valve 8 Inch Carbon Steel -محبس جلوب بخار بالفلانشات كاربون استيل 8 بوصة بولاندي
Globe valves are linear motion closing-down valves in which the closure member is moved squarely on and off the seat. Usually the closure member is referred as a disc, irrespective of its shape. The seat opening varies in direct proportion to the travel of the disc. This proportional relationship between valve opening and disc travel is ideally suited for duties involving regulation of flow rate. Globe valves are most suitable for throttling and controlling fluid flow and are generally employed in small size piping
كوع كاربون استيل 6 بوصة
Carbon Steel Elbow 6 Inch
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
كوع البان لحام استانلس استيل 316 90°DN80
Stainless Sanitary Weld Elbow 90° DN80
Sanitary Weld Elbow
Sanitary Weld Elbow is in the process system to change the fluid direction, it is a very important sanitary fittings to the installation. Sanitary weld elbow is made in material stainless steel 304 and 316 or specified grade, with the advantage of high cleanliness surface and corrosion resistance. Wellgreen offers sanitary welding fittings through 1/2” to 12” with standard 3A, DIN, SMS, BS, ISO, IDF, DS, BPF, I-Line etc, also we are ability to offer customized weld elbow and bend.