Showing 2513–2528 of 4001 resultsSorted by popularity
-
38.000,00 EGP
Weld neck flanges are used in applications where the conditions are severe and critical. Some of these conditions include high pressure, wide fluctuations in temperature and pressure, high temperature, fluids that are volatile and hazardous, and temperatures in the sub-zero range.
Weld neck flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.
During a dimensional inspection of weld neck flange, you should check for
- Outer & Inner Diameter of body
- Bolt Circle & Bolt hole Diameter
- the thickness of weld end
- Length of the Hub and
- Straightness and alignment of the bolt hole
-
97.200,00 EGP
لوح 316 للاستخدمات الطبية والكيماوية
-
50.760,00 EGP
لوح 316 للاستخدمات الطبية والكيماوية
-
1.735,00 EGP
الواح لامع استيراد 1.22*2.44م سمك ١مم ويتوافر 0.6مم 0.8مم مناسبة لاعمال الديكور والانشاءات المختلفة
-
1,00 EGP
Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
-
1,00 EGP
Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
-
1,00 EGP
Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
-
500,00 EGP
مادة فينش ياباني لتظيف وتلميع الاستانلس استيل
-
0,00 EGP
ASTM A240 Type 304 Plate, AISI 304 Ring
Stainless Steel 304 Sheet is made up of an austenitic stainless steel that has 18% chromium and 8% nickel in the composition. This is the most used grade of all stainless steels in the world. The sheets are strong, mild corrosion resistant and have applications in a variety of industries. The Stainless Steel 304 Sheet also has manganese, carbon, silicon, sulfur, nitrogen and phosphorus in the composition. The material is strong and has 205MPa minimum yield strength and 515MPa minimum tensile strength in general
-
-
120,00 EGP
Stainless Steel Pipe Fittings
Stainless steel fittings are made of corrosion-resistant 304 stainless steel for durability and dependability. Suitable for diverse industrial applications such as vibration, high pressure or corrosive conditions. For improved sealing and reduced galling* the manufacturer recommends using both Gray Stainless Steel PTFE Thread Seal Tape and Weld-On White Seal Plus Mulit-purpose Pipe Joint Compound.
Stainless Steel Fitting Features
- 304 Stainless Steel
- 300 PSI rating (-20° to 150° F)
- Class 150
-
110,00 EGP
Stainless Steel Pipe Fittings
Stainless steel fittings are made of corrosion-resistant 304 stainless steel for durability and dependability. Suitable for diverse industrial applications such as vibration, high pressure or corrosive conditions. For improved sealing and reduced galling* the manufacturer recommends using both Gray Stainless Steel PTFE Thread Seal Tape and Weld-On White Seal Plus Mulit-purpose Pipe Joint Compound.
Stainless Steel Fitting Features
- 304 Stainless Steel
- 300 PSI rating (-20° to 150° F)
- Class 150
-
340,00 EGP
We stock multiple sizes of stainless steel hex nipples.
We offer stainless steel hex nipples in 304 stainless steel and 316 stainless steel. Hex Nipples are NPT x NPT with a hex nut in the middle. NPT Threads conform to ASME B1.20.1.
Types: 150#
Sizes: 1/8″ – 4″
Grades: 304 – 316
-
-
3.020,00 EGP
Schedule 10 Stainless Steel Pipe is one type of the stainless steel products. There are ferritic, austenitic, duplex and martensitic stainless steel materials available. The SCH 10 Stainless Steel Pipe is a low schedule pipe that has lower pressure capacities. The diameter, the wall thickness and the length of the pipes vary according to different standards such as the ASTM, ASME and API standards. The outer diameter of the SS 304 sch 10 pipe ranges from 21.3mm to 762mm.
-
4.200,00 EGP
Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
