Showing 241–256 of 4430 resultsSorted by popularity
-
-
-
Square Steel Tube 2 *2 *2mm
360,00 EGPماسورة مربعه(علبه) حديد 2*2 سم سمك 2 مم
Square Steel Tube is a welded structural grade tubing that is available in either type A513 or A500 Grade B, depending on it’s size and wall thickness. Either grade is ideal for all structural applications, general fabrication, manufacturing and repairs. Steel Square Tube is widely used in industrial maintenance, agricultural implements, transportation equipment, truck beds, trailers, frames, etc. It’s box-shape configuration allows for much greater strength and rigidity compared to angles or channels. This steel shape is easy to weld, cut, form and machine with the proper equipment and knowledge.
-
Square Steel Tube 25*25*2mm
440,00 EGPماسورة مربعه(علبه) حديد 2.5*2.5 سم سمك 2 مم
Square Steel Tube is a welded structural grade tubing that is available in either type A513 or A500 Grade B, depending on it’s size and wall thickness. Either grade is ideal for all structural applications, general fabrication, manufacturing and repairs. Steel Square Tube is widely used in industrial maintenance, agricultural implements, transportation equipment, truck beds, trailers, frames, etc. It’s box-shape configuration allows for much greater strength and rigidity compared to angles or channels. This steel shape is easy to weld, cut, form and machine with the proper equipment and knowledge.
-
1,00 EGPعمود مدور صلب كروم C42 قطر 90مم
Steel C42 Round Bar Size 90 mm
304/304L Stainless Steel Round, an economical grade of stainless that is ideal for all applications where strength and superior corrosion resistance is required. 304 Stainless Round has a durable dull, mill finish that is widely used for all types of fabrication projects that are exposed to the elements – chemical, acidic, fresh water, and salt water environments.
Specifications: ASTM A276, QQS-763, T304/304L,non-polished finish
AKA: stainless rod, stainless round bar
Applications: frame work, braces, supports, shafting. axels, marine, food, etc.
Workability: Easy to Weld, Moderate Cutting, Forming and Machining.
Mechanical Properties: Brinell = 170, Tensile = 85,000 +/-, Yield = 34,000 +/-
Nonmagnetic
How is it Measured? Diameter (A) X Length -
4.000,00 EGPكوع استانلس استيل مط لحام 304 90 ج 10 1.5 بوصه
SS Buttweld Elbow SCH 10 90° Size 1.5 inch
Butt welding A butt weld is the most common type of joint that is used in the fabrication of structures and piping systems. It is a circumferential weld joint where the molten metal is applied around the joint.Stainless Steel Butt Weld Fittings are made from the finest quality stainless steel designed to be dimensionally precise. The
advantages of these fittings are its high tensile strength, robust nature and rust free properties.
Stainless Steel butt-weld fittings made from welded stainless steel pipe which is manufactured from 2B or HRAP
stainless steel strip, which is formed to shape and longitudinally welded to complete the pipe -Stainless Steel Buttweld SCH10-40-80s 90 Degree Elbow -
28.400,00 EGPY-FLANGE STRAINER ANSI 150Lb Strainer 1mm- صفاية استانلس حرف واي ماش 1مم 3 Inch 150 <
Stainless Steel (316) Ball Valve – Full Port 1,000 PSI (WOG)Stainless Steel Ball Valve –
Full Port – 1,000 WOG (PSI) Heavy Duty For Water, Oil, And Gas With Blue Locking Handles, NPT• S.S. 316 investment casting body
• Working Pressure of 1,000 PSI (WOG)
• Minimal pressure drop due to large full-size ports
• Suitable for full range of liquids and gas
• Temperature range: -60 to 450 Degrees F
• Low operation torque
• 100% individually tested
• Blowout-proof stem
• NPT threaded ends to ANSI B1.20.1
• Heavy duty locking handles with blue vinyl insulator -
فلانشة استانلس برقبة ٣١٦ ج ٤٠ مقاس 3بوصة #150
6.070,00 EGPSS Flange Wn 316 #150 sch 40 3 inch
Weld neck flanges are used in applications where the conditions are severe and critical. Some of these conditions include high pressure, wide fluctuations in temperature and pressure, high temperature, fluids that are volatile and hazardous, and temperatures in the sub-zero range.Weld neck flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.
During a dimensional inspection of weld neck flange, you should check for
- Outer & Inner Diameter of body
- Bolt Circle & Bolt hole Diameter
- the thickness of weld end
- Length of the Hub and
- Straightness and alignment of the bolt hole
-
فلانشة استانلس برقبة 316 ج ٤٠ مقاس 2.5 بوصة #150
5.200,00 EGPSS Flange Wn 316 #150 sch 40 2.5 inch
Weld neck flanges are used in applications where the conditions are severe and critical. Some of these conditions include high pressure, wide fluctuations in temperature and pressure, high temperature, fluids that are volatile and hazardous, and temperatures in the sub-zero range.Weld neck flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.
During a dimensional inspection of weld neck flange, you should check for
- Outer & Inner Diameter of body
- Bolt Circle & Bolt hole Diameter
- the thickness of weld end
- Length of the Hub and
- Straightness and alignment of the bolt hole
-
فلانشة استانلس برقبة 316 ج ٤٠ مقاس 2.5 بوصة #150
5.200,00 EGPSS Flange Wn 316 #150 sch 40 2.5 inch
Weld neck flanges are used in applications where the conditions are severe and critical. Some of these conditions include high pressure, wide fluctuations in temperature and pressure, high temperature, fluids that are volatile and hazardous, and temperatures in the sub-zero range.Weld neck flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.
During a dimensional inspection of weld neck flange, you should check for
- Outer & Inner Diameter of body
- Bolt Circle & Bolt hole Diameter
- the thickness of weld end
- Length of the Hub and
- Straightness and alignment of the bolt hole
-
لوح استانلس استيل 201 لميع 0.8مم 1*2 SS 201 AB 1×2m ×0.8mm
1.730,00 EGPالواح لامع استيراد 1.22*2.44م سمك ١مم ويتوافر 0.6مم 0.8مم مناسبة لاعمال الديكور والانشاءات المختلفة
-
Square Steel Tube100*100*2mm
1.980,00 EGPماسورة مربعه(علبه) حديد 10 *10سم سمك 2 مم
Square Steel Tube is a welded structural grade tubing that is available in either type A513 or A500 Grade B, depending on it’s size and wall thickness. Either grade is ideal for all structural applications, general fabrication, manufacturing and repairs. Steel Square Tube is widely used in industrial maintenance, agricultural implements, transportation equipment, truck beds, trailers, frames, etc. It’s box-shape configuration allows for much greater strength and rigidity compared to angles or channels. This steel shape is easy to weld, cut, form and machine with the proper equipment and knowledge.
-
10.725,00 EGPFlange Y Strainer DN 40 PN16/40 Steel Strainer 1mm- صفاية حديد حرف واي ماش 1مم Dn150 pn 16 <
Stainless Steel (316) Ball Valve – Full Port 1,000 PSI (WOG)Stainless Steel Ball Valve –
Full Port – 1,000 WOG (PSI) Heavy Duty For Water, Oil, And Gas With Blue Locking Handles, NPT• S.S. 316 investment casting body
• Working Pressure of 1,000 PSI (WOG)
• Minimal pressure drop due to large full-size ports
• Suitable for full range of liquids and gas
• Temperature range: -60 to 450 Degrees F
• Low operation torque
• 100% individually tested
• Blowout-proof stem
• NPT threaded ends to ANSI B1.20.1
• Heavy duty locking handles with blue vinyl insulator -
1.690,00 EGPDN100
rubber expansion joint DN 100 PN10/16 steel galvanized face-to-face- وصله كاوتش بالفلانشات حديد Pn100
Stainless Steel (316) Ball Valve – Full Port 1,000 PSI (WOG)Stainless Steel Ball Valve –
Full Port – 1,000 WOG (PSI) Heavy Duty For Water, Oil, And Gas With Blue Locking Handles, NPT• S.S. 316 investment casting body
• Working Pressure of 1,000 PSI (WOG)
• Minimal pressure drop due to large full-size ports
• Suitable for full range of liquids and gas
• Temperature range: -60 to 450 Degrees F
• Low operation torque
• 100% individually tested
• Blowout-proof stem
• NPT threaded ends to ANSI B1.20.1
• Heavy duty locking handles with blue vinyl insulator -
16.200,00 EGPمحبس عدم رجوع بالفلانشات DN100
Non-return valve DN 100 PN 16 with flange metal-
Stainless Steel (316) Ball Valve – Full Port 1,000 PSI (WOG)Stainless Steel Ball Valve –
Full Port – 1,000 WOG (PSI) Heavy Duty For Water, Oil, And Gas With Blue Locking Handles, NPT• S.S. 316 investment casting body
• Working Pressure of 1,000 PSI (WOG)
• Minimal pressure drop due to large full-size ports
• Suitable for full range of liquids and gas
• Temperature range: -60 to 450 Degrees F
• Low operation torque
• 100% individually tested
• Blowout-proof stem
• NPT threaded ends to ANSI B1.20.1
• Heavy duty locking handles with blue vinyl insulator -
23.625,00 EGPمحبس عدم رجوع بالفلانشات DN150
Non-return valve DN 150 PN 16 with flange metal-
Stainless Steel (316) Ball Valve – Full Port 1,000 PSI (WOG)Stainless Steel Ball Valve –
Full Port – 1,000 WOG (PSI) Heavy Duty For Water, Oil, And Gas With Blue Locking Handles, NPT• S.S. 316 investment casting body
• Working Pressure of 1,000 PSI (WOG)
• Minimal pressure drop due to large full-size ports
• Suitable for full range of liquids and gas
• Temperature range: -60 to 450 Degrees F
• Low operation torque
• 100% individually tested
• Blowout-proof stem
• NPT threaded ends to ANSI B1.20.1
• Heavy duty locking handles with blue vinyl insulator