Aluminum Sheet 1050 15 mm1×2 m – الواح الومنيوم م15mm1×2 مم
2.280,00 EGP
لوح الومنيوم بيور كود ١٠٥٠ نجع حمادي
Showing 2577–2592 of 4063 resultsSorted by popularity
-
Aluminum Sheet 1050 15 mm1×2 m
2.280,00 EGP -
لوح استانلس استيل ميرور 201 مط 1.25مم ×1.25×2.5م SS 201 Mirror 1.25×2.5m×1.25mm
11.100,00 EGPStainless steel grade 201 is a mid-range product typically found in appliances, cookware, sinks, kitchen utensils, and food service equipment. It is also found in automotive parts and clamps as well as railroad cars, and window trim. Its structural integrity and makeup make it ideal for uses in these industries. It tends to not be a good choice, however, for outdoor structural use, because it is susceptible to pitting and crevice corrosion from certain elements like salt water.
-
ماسورة لميع استانلس 316 سيمليس 8مم سمك1مم
700,00 EGP316 SS Round Seamlles Tube Mirror OD 8 W 1mm 6m
Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
-
مسمار صلب 8.8 سمك 20مم * 70 مم
1,00 EGPBOLT 8.8 20mm*70mm
مسمار صلب درجة الصلابة 8.8 مقاسات متنوعة وبضاعة حاضرة خصم خاص للكميات
-
فلانشة استانلس برقبة ٣١٦ ج ٤٠ مقاس 16بوصة #150
38.000,00 EGPSS Flange Wn 316 #150 sch 40 16 inch
Weld neck flanges are used in applications where the conditions are severe and critical. Some of these conditions include high pressure, wide fluctuations in temperature and pressure, high temperature, fluids that are volatile and hazardous, and temperatures in the sub-zero range.Weld neck flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.
During a dimensional inspection of weld neck flange, you should check for
- Outer & Inner Diameter of body
- Bolt Circle & Bolt hole Diameter
- the thickness of weld end
- Length of the Hub and
- Straightness and alignment of the bolt hole
-
لوح استانلس استيل 316 مط بدون غلاف بارد 1.5*3 سمك 6مم
69.120,00 EGPS S sheet cold matte uncovered 316 1.5*3 ×6m
لوح 316 للاستخدمات الطبية والكيماوية
-
لوح استانلس استيل 201 لميع 1مم ×1.22م×2.5م SS 201 Mirror k9 1.22×2.5m×1mm
1.735,00 EGPالواح لامع استيراد 1.22*2.44م سمك ١مم ويتوافر 0.6مم 0.8مم مناسبة لاعمال الديكور والانشاءات المختلفة
-
استانليس 304 مواسير عدلة مدور لميع لحام 4مم 0.45مم
1,00 EGP304 SS Round AW Tube Mirror OD 4 mm 0.45
Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
-
استانليس 304 مواسير عدلة مدور لميع لحام 3مم 0.45مم
1,00 EGP304 SS Round AW Tube Mirror OD 3 mm 0.45 mm
Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
-
استانليس 304 مواسير عدلة مدور لميع لحام 5مم 0.45مم
1,00 EGP304 SS Round AW Tube Mirror OD 5 mm 0.5 mm
Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
-
-
لوح استانلس استيل 304 مط بدون غلاف بارد 1.5* 3م 5مم
36.000,00 EGPSS 304 Sheet Cold Matte Uncovered 5 mm 1.5* 3 m
ASTM A240 Type 304 Plate, AISI 304 Ring
Stainless Steel 304 Sheet is made up of an austenitic stainless steel that has 18% chromium and 8% nickel in the composition. This is the most used grade of all stainless steels in the world. The sheets are strong, mild corrosion resistant and have applications in a variety of industries. The Stainless Steel 304 Sheet also has manganese, carbon, silicon, sulfur, nitrogen and phosphorus in the composition. The material is strong and has 205MPa minimum yield strength and 515MPa minimum tensile strength in general
-
-
120,00 EGPنبل قلاووظ استانلس 316 3/4 بوصة ج 40
316 S.S Threaded Nipple 3/4 Inch SCH 40
Stainless Steel Pipe Fittings
Stainless steel fittings are made of corrosion-resistant 304 stainless steel for durability and dependability. Suitable for diverse industrial applications such as vibration, high pressure or corrosive conditions. For improved sealing and reduced galling* the manufacturer recommends using both Gray Stainless Steel PTFE Thread Seal Tape and Weld-On White Seal Plus Mulit-purpose Pipe Joint Compound.
Stainless Steel Fitting Features
- 304 Stainless Steel
- 300 PSI rating (-20° to 150° F)
- Class 150
-
110,00 EGPنبل قلاووظ استانلس 316 1/2 بوصة ج 40
316 S.S Threaded Nipple 1/2 Inch SCH 40
Stainless Steel Pipe Fittings
Stainless steel fittings are made of corrosion-resistant 304 stainless steel for durability and dependability. Suitable for diverse industrial applications such as vibration, high pressure or corrosive conditions. For improved sealing and reduced galling* the manufacturer recommends using both Gray Stainless Steel PTFE Thread Seal Tape and Weld-On White Seal Plus Mulit-purpose Pipe Joint Compound.
Stainless Steel Fitting Features
- 304 Stainless Steel
- 300 PSI rating (-20° to 150° F)
- Class 150
-
340,00 EGPنبل مسدس قلاووظ استانلس 316 1 بوصة
S.S316 Hexagon Nipple 1 Inch
We stock multiple sizes of stainless steel hex nipples.
We offer stainless steel hex nipples in 304 stainless steel and 316 stainless steel. Hex Nipples are NPT x NPT with a hex nut in the middle. NPT Threads conform to ASME B1.20.1.
Types: 150#
Sizes: 1/8″ – 4″
Grades: 304 – 316