جاري تحديث الاسعار طبقا لسعر صرف الدولار برجاء متابعه المبيعات لتحديث الاسعار قبل او بعد الطلب على الموقع 01000561264 01000560528 Dismiss
Showing 2657–2672 of 4063 resultsSorted by popularity
Carbon Steel Elbow 4 Inch
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
Equal Tee Carbon Steel 10 inch
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them
Globe valves are linear motion closing-down valves in which the closure member is moved squarely on and off the seat. Usually the closure member is referred as a disc, irrespective of its shape. The seat opening varies in direct proportion to the travel of the disc. This proportional relationship between valve opening and disc travel is ideally suited for duties involving regulation of flow rate. Globe valves are most suitable for throttling and controlling fluid flow and are generally employed in small size piping
كوع البان لحام استانلس استيل 316 90°DN80
Stainless Sanitary Weld Elbow 90° DN80
Sanitary Weld Elbow is in the process system to change the fluid direction, it is a very important sanitary fittings to the installation. Sanitary weld elbow is made in material stainless steel 304 and 316 or specified grade, with the advantage of high cleanliness surface and corrosion resistance. Wellgreen offers sanitary welding fittings through 1/2” to 12” with standard 3A, DIN, SMS, BS, ISO, IDF, DS, BPF, I-Line etc, also we are ability to offer customized weld elbow and bend.
لاكور البان 316DN80
Stainless Sanitary Union DN80 316
Sanitary DIN Union Fittings are fabricated complying with DIN 11851 standard. Consisting of a round Slotted Nut, a Weld liner and Weld Male, and a o-ring seal. Wellgreen sanitary offers DIN sanitary union fittings assembling with different types
|
DIMENSION |
DN10 – DN150 |
|---|---|
|
MATERIAL |
T304, T316L, 1.4301, 1.4404 |
|
STANDARD |
DIN 11851 |
|
SEALING GASKET |
Silicone, EPDM, PTFE, Buna-N etc. |
|
TEMPERATURE |
-30°C / -22°F up to +120°C/ +248°F |
|
APPLICATION |
Pharmacy, Beer, Food, Petroleum, Dairy, Beverage,Biotech ,Cosmetics etc. |
نبل مسدس قلاووظ استانلس 304 1/4 بوصة
S.S304 Hexagon Nipple 1/4
We offer stainless steel hex nipples in 304 stainless steel and 316 stainless steel. Hex Nipples are NPT x NPT with a hex nut in the middle. NPT Threads conform to ASME B1.20.1.
تية البان لحام 316DN80
316 Sanitary Weld Tee DN80
Sanitary Weld Tee Fittings includes reducing and equal tees, it is 3 ways ends sanitary fittings which with butt weld connected. Wellgreen offers sanitary butt weld fittings through 1/2” to 12” with standard 3A, DIN, SMS, BS, ISO, IDF, DS, BPF, I-Line etc,
| Application | Food, Brewery, Beverage, Dairy, Pharmaceutical, Fine chemical, Cosmetic etc. |
|---|
|
Sanitary Stainless Steel Pipe Holder
|
|||
|
Body Material
|
AISI 304 /
|
||
|
Available Size
|
1″ ~ 12″
|
||
|
Type
|
Round / Hexagon / Oval
|
||
|
Fastener
|
Bolt
|
||
|
Round Diameter
|
12.7mm ~ 304mm
|
||
|
Application
|
Stainless Steel Pipe System
|
||
|
Sanitary Stainless Steel Pipe Holder
|
|||
|
Body Material
|
AISI 304 /
|
||
|
Available Size
|
1″ ~ 12″
|
||
|
Type
|
Round / Hexagon / Oval
|
||
|
Fastener
|
Bolt
|
||
|
Round Diameter
|
12.7mm ~ 304mm
|
||
|
Application
|
Stainless Steel Pipe System
|
||
لاكور البان 304DN65
Stainless Sanitary Union DN65 304
Sanitary DIN Union Fittings are fabricated complying with DIN 11851 standard. Consisting of a round Slotted Nut, a Weld liner and Weld Male, and a o-ring seal. Wellgreen sanitary offers DIN sanitary union fittings assembling with different types
|
DIMENSION |
DN10 – DN150 |
|---|---|
|
MATERIAL |
T304, T316L, 1.4301, 1.4404 |
|
STANDARD |
DIN 11851 |
|
SEALING GASKET |
Silicone, EPDM, PTFE, Buna-N etc. |
|
TEMPERATURE |
-30°C / -22°F up to +120°C/ +248°F |
|
APPLICATION |
Pharmacy, Beer, Food, Petroleum, Dairy, Beverage,Biotech ,Cosmetics etc. |
كوع البان لحام استانلس استيل 316 90°DN65
Stainless Sanitary Weld Elbow 90° DN65
Sanitary Weld Elbow is in the process system to change the fluid direction, it is a very important sanitary fittings to the installation. Sanitary weld elbow is made in material stainless steel 304 and 316 or specified grade, with the advantage of high cleanliness surface and corrosion resistance. Wellgreen offers sanitary welding fittings through 1/2” to 12” with standard 3A, DIN, SMS, BS, ISO, IDF, DS, BPF, I-Line etc, also we are ability to offer customized weld elbow and bend.
|
Size |
D |
L |
R |
|
DN10 |
12 |
26 |
26 |
|
DN15 |
18 |
35 |
35 |
|
DN20 |
22 |
40 |
40 |
|
DN25 |
28 |
50 |
50 |
|
DN32 |
34 |
55 |
55 |
|
DN40 |
40 |
60 |
60 |
|
DN50 |
52 |
70 |
70 |
|
DN65 |
70 |
80 |
80 |
|
DN80 |
85 |
90 |
90 |
|
DN100 |
104 |
100 |
100 |
|
DN125 |
129 |
187 |
187 |
|
DN150 |
154 |
225 |
225 |
|
DN200 |
204 |
300 |
300 |
SS 304 Round Tube SMLS DN65 OD 70X2 mm
Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
SS 316 Round TUBE SMLS DN80 OD 85 X2 mm
Stainless steel tube is typically specified by OD (outside diameter) WT (wall thickness), grade, condition and surface finish. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength. Tube is manufactured in round, sections in a variety of wall thicknesses and usually by the processes of longitudinal welding, hot and cold drawing spiral welding. Finishes or appearance range from unpolished to very highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to a mirror appearance. Finishes are selected to suit application and aesthetic appeal. Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or by the use of mechanical fittings which enables dismantling for hygienic cleaning
