Aluminium PIPE 6063 SIZE OD 30 mm X Wall 3 mm 6M ماسورة الومنيوم 30* 3 مم 6 م
1.200,00 EGP
Aluminium PIPE 6063 SIZE OD 30 mm X Wall 3 mm 6M<p> ماسورة الومنيوم 30* 3 مم 6 م
Showing 561–576 of 4191 resultsSorted by popularity
-
Aluminium PIPE 6063 SIZE OD 30 mm X Wall 3 mm 6M
1.200,00 EGP -
ماسورة مربعة لميع ومصنفر استانلس 40 *40 مم سمك 1.5مم 6م 201
1.496,00 EGPSquare Mirror(BA,8K) pipe stainless 40*40 mm thickness 1.5 mm 6
علب مربعه استانلس لميع من 10 ×10 الي ١٠٠×١٠٠ مم ويوجد تصنيع بتلطلب للمقاسات الأكبر لميع ومصنفر ٦م و٣ م فضي وذهبي
طول 6 م
شكل جمالى من الاستانلس 304 اللامع لاعمال الديكور الداخلى والسلالم والهندريلات والمطابخ والاثاثمغلفه بكيس بلاستيك للحماية وعدم التجريح والتخديش
-
عمود مربع استانلس 304 مقاس 10*10 مم
1.360,00 EGP304 SS Square Bar Size 10*10 mm
304/304L Stainless Steel Square, is the more economical stainless square bar ideal for all applications where greater strength and superior corrosion resistance is required. 304 Stainless Square has a durable dull, mill finish that is widely used for all types of fabrication projects that are exposed to the elements – chemical, acidic, fresh water, and salt water environments.
- Applications: frame work, braces, supports, shafts, axels, marine, food, etc.
- عمدان مربعة استانلس تصلح للعديد من الاستخدامات فى القطاعات المختلفة
- دعائم -اسياخ لمعدات الشواء -مسامير =اجزاء ميكانيكية للمكن .الخ
-
غطاء تانك (مانهول) استانلس 316 60سم
13.800,00 EGPHygenic Stainless 316 cover Round Manhole 60cm with Handle
Round manhole cover with sight glass, also known as pressure manhole, which is widely used on large tanks and containers in the fields of dairy products, beer, food and beverage, biopharmaceuticals and so on .
-
8,00 EGPمسمار ألن غاطس 304 10* 10مم
SS 304 Hex Socket Set Grub Screws (Allen) 10 x10 MM
UNC Socket Head Cap Screws ASME B18.3-2012
Also known as an Allen screw or Allen bolt, or simply a cap screw, socket head cap screws are a more modern alternative standard machine fastener to the standard hexagon headed bolt or setscrew, as found on much modern machinery. A hex key (otherwise known as an Allen key) is required to fit these fasteners. Conforming to ASME/ANSI B18. 3, the contact surfaces of this screw or bolt are protected from external damage. Generally manufactured with a partial thread beyond a certain length and nominal diameter combination -
لوح صاج ايكون 1.06 *6 سمك 0.4 مم
1.150,00 EGPCorrugated Steel Sheet for Roofing 1.6 *6 m * 0.4 mm
ألواح الصاج المعرج والذي يصنع من الصاج المجلفن او الملون طبقا للمواصفات القياسية الأمريكية أو الأوروبية بسمك يبدأ من 0.3مم حتى سمك 1 مم بألوان متعددة والتى يمكن استخدامها في عمل التغطيات والتجاليد الخاصة بالمنشآت والمباني المعدنية كما تقوم الشركة بتوريد الحليات اللازمة للتقفيل ومجرى المطر
-
-
-
-
-
-
-
-
90,00 EGPكوع قلاووظ استانلس 304 4 بوصة 90°
304 Stainless Steel Threaded 90° Elbow 4 Inch
Stainless Steel Pipe Fittings
Stainless steel fittings are made of corrosion-resistant 304 stainless steel for durability and dependability. Suitable for diverse industrial applications such as vibration, high pressure or corrosive conditions. For improved sealing and reduced galling* the manufacturer recommends using both Gray Stainless Steel PTFE Thread Seal Tape and Weld-On White Seal Plus Mulit-purpose Pipe Joint Compound.
Stainless Steel Fitting Features
- 304 Stainless Steel
- 300 PSI rating (-20° to 150° F)
- Class 150
*Stainless Steel Thread Galling
Thread galling seems to be most common with fittings and fasteners made of stainless steel, aluminum, titanium and other alloys which self-generate an oxide surface for corrosion protection. During tightening, pressure builds up between the thread contact surfaces where the oxides are removed and the metal can shear or lock together. In an extreme case, galling can lead to seizing of the threaded joint. Additional force can break the bolt or fitting. Experts say there are three ways to reduce the chance of threads galling during assembly:
- By reducing the speed at which the fittings are assembled helps to reduce the friction and heat generated that leads to a higher likelihood of galling occurring.
- Using thread lubrication will help to reduce galling. Please refer to the Related Products on this page, or click the links below of products available on our website specifically rated for stainless steel fitting assembly.
- If used together, different grades of stainless steel (304 and 316 are the most common) can reduce galling because each grade has a different hardness and work-harden at different rates.
Products recommended for stainless steel fittings to reduce galling can be found by clicking on the Related Products tab on this page.
-
90,00 EGPكوع قلاووظ استانلس 304 3 بوصة 90°
304 Stainless Steel Threaded 90° Elbow 3 Inch
Stainless Steel Pipe Fittings
Stainless steel fittings are made of corrosion-resistant 304 stainless steel for durability and dependability. Suitable for diverse industrial applications such as vibration, high pressure or corrosive conditions. For improved sealing and reduced galling* the manufacturer recommends using both Gray Stainless Steel PTFE Thread Seal Tape and Weld-On White Seal Plus Mulit-purpose Pipe Joint Compound.
Stainless Steel Fitting Features
- 304 Stainless Steel
- 300 PSI rating (-20° to 150° F)
- Class 150
*Stainless Steel Thread Galling
Thread galling seems to be most common with fittings and fasteners made of stainless steel, aluminum, titanium and other alloys which self-generate an oxide surface for corrosion protection. During tightening, pressure builds up between the thread contact surfaces where the oxides are removed and the metal can shear or lock together. In an extreme case, galling can lead to seizing of the threaded joint. Additional force can break the bolt or fitting. Experts say there are three ways to reduce the chance of threads galling during assembly:
- By reducing the speed at which the fittings are assembled helps to reduce the friction and heat generated that leads to a higher likelihood of galling occurring.
- Using thread lubrication will help to reduce galling. Please refer to the Related Products on this page, or click the links below of products available on our website specifically rated for stainless steel fitting assembly.
- If used together, different grades of stainless steel (304 and 316 are the most common) can reduce galling because each grade has a different hardness and work-harden at different rates.
Products recommended for stainless steel fittings to reduce galling can be found by clicking on the Related Products tab on this page.
-
90,00 EGPكوع قلاووظ استانلس 304 2 بوصة 90°
304 Stainless Steel Threaded 90° Elbow2 Inch
Stainless Steel Pipe Fittings
Stainless steel fittings are made of corrosion-resistant 304 stainless steel for durability and dependability. Suitable for diverse industrial applications such as vibration, high pressure or corrosive conditions. For improved sealing and reduced galling* the manufacturer recommends using both Gray Stainless Steel PTFE Thread Seal Tape and Weld-On White Seal Plus Mulit-purpose Pipe Joint Compound.
Stainless Steel Fitting Features
- 304 Stainless Steel
- 300 PSI rating (-20° to 150° F)
- Class 150
*Stainless Steel Thread Galling
Thread galling seems to be most common with fittings and fasteners made of stainless steel, aluminum, titanium and other alloys which self-generate an oxide surface for corrosion protection. During tightening, pressure builds up between the thread contact surfaces where the oxides are removed and the metal can shear or lock together. In an extreme case, galling can lead to seizing of the threaded joint. Additional force can break the bolt or fitting. Experts say there are three ways to reduce the chance of threads galling during assembly:
- By reducing the speed at which the fittings are assembled helps to reduce the friction and heat generated that leads to a higher likelihood of galling occurring.
- Using thread lubrication will help to reduce galling. Please refer to the Related Products on this page, or click the links below of products available on our website specifically rated for stainless steel fitting assembly.
- If used together, different grades of stainless steel (304 and 316 are the most common) can reduce galling because each grade has a different hardness and work-harden at different rates.
Products recommended for stainless steel fittings to reduce galling can be found by clicking on the Related Products tab on this page.