Showing 945–960 of 4430 resultsSorted by popularity
-
800,00 EGP
6061 Aluminum Round Bar , is an extruded solid aluminum bar that is highly versatile, easy to work with and has a wide range of applications. 6061 Aluminum Round is our Most Popular aluminum round that is widely used for all types of fabrication projects where lightweight and corrosion resistance is a concern. Ideal for fabricating pins, shafts, dowles,…
-
26.250,00 EGP
لوح الومنيوم بيور كود ١٠٥٠ نجع حمادي
-
30.912,00 EGP
Aluminium alloy 6082 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys. Alloy 6082 is known as a structural alloy. In plate form, 6082 is the alloy most commonly used for machining. As a relatively new alloy, the higher strength of 6082 has seen it replace 6061 in many applications. The addition of a large amount of manganese controls the grain structure which in turn results in a stronger alloy.
It is difficult to produce thin walled, complicated extrusion shapes in alloy 6082. The extruded surface finish is not as smooth as other similar strength alloys in the 6000 serie
-
20.160,00 EGP
Aluminium alloy 6082 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys. Alloy 6082 is known as a structural alloy. In plate form, 6082 is the alloy most commonly used for machining. As a relatively new alloy, the higher strength of 6082 has seen it replace 6061 in many applications. The addition of a large amount of manganese controls the grain structure which in turn results in a stronger alloy.
It is difficult to produce thin walled, complicated extrusion shapes in alloy 6082. The extruded surface finish is not as smooth as other similar strength alloys in the 6000 serie
-
20.600,00 EGP
083 – H32 Sheet
Aluminium 5083 is known for exceptional performance in extreme environments. 5083 is highly resistant to attack by both seawater and industrial chemical environments.
Alloy 5083 also retains exceptional strength after welding. It has the highest strength of the non-heat treatable alloys but is not recommended for use in temperatures in excess of 65°C.
Applications
Alloy 5083 is typically used in:
~ Shipbuilding
~ Rail cars
~ Vehicle bodies
~ Tip truck bodies
~ Mine skips and cages
~ Pressure vessels
-
7.350,00 EGP
بالتات مقطعه بالطلب المسبق
شريحه الومنيوم
it has high strength, average corrosion resistance, and pretty poor weldability. Its high zinc and chromium also mean that it has decent ductility and toughness, too.
-
-
Sale!
1.700,00 EGP Original price was: 1.700,00 EGP.1.300,00 EGPCurrent price is: 1.300,00 EGP.
ذراع تثبيت زجاج فى الماسورة المدورة او المربعه مصنوع من خامة استانلس استيل 304 لامع
ورأس الذراع متحركة اتتناسب مع زاوية ميل الماسورة مستورد صينى ويوجد مصنفر ويوجد 316 بالطلب
-
65,00 EGP
Flat head eye bolt with metric thread that can be screwed into a threaded hole, nut or drop-in anchor. The hole in the flat head eye bolt is used, among other things, for ceiling and pipe suspension
-
11.520,00 EGP
لوح 316 للاستخدمات الطبية والكيماوية
-
43.800,00 EGP
Type 316 (UNS S31600) is a molybdenum-bearing austenitic stainless steel which is more resistant to general
corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels
such as Type 304. This alloy also offers higher creep, stress-to-rupture and tensile strength at elevated
temperatures. In addition to excellent corrosion resistance and strength properties, grades 316 and 316L also
provide the excellent fabricability and formability which are typical of austenitic stainless steels
-
121.640,00 EGP
Type 316 (UNS S31600) is a molybdenum-bearing austenitic stainless steel which is more resistant to general
corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels
such as Type 304. This alloy also offers higher creep, stress-to-rupture and tensile strength at elevated
temperatures. In addition to excellent corrosion resistance and strength properties, grades 316 and 316L also
provide the excellent fabricability and formability which are typical of austenitic stainless steels
-
77.850,00 EGP
Type 316 (UNS S31600) is a molybdenum-bearing austenitic stainless steel which is more resistant to general
corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels
such as Type 304. This alloy also offers higher creep, stress-to-rupture and tensile strength at elevated
temperatures. In addition to excellent corrosion resistance and strength properties, grades 316 and 316L also
provide the excellent fabricability and formability which are typical of austenitic stainless steels
-
36.980,00 EGP
304/304L Stainless Steel Round, an economical grade of stainless that is ideal for all applications where strength and superior corrosion resistance is required. 304 Stainless Round has a durable dull, mill finish that is widely used for all types of fabrication projects that are exposed to the elements – chemical, acidic, fresh water, and salt water environments.
Specifications: ASTM A276, QQS-763, T304/304L,non-polished finish
AKA: stainless rod, stainless round bar
Applications: frame work, braces, supports, shafting. axels, marine, food, etc.
Workability: Easy to Weld, Moderate Cutting, Forming and Machining.
Mechanical Properties: Brinell = 170, Tensile = 85,000 +/-, Yield = 34,000 +/-
Nonmagnetic
How is it Measured? Diameter (A) X Length
-
46.800,00 EGP
304/304L Stainless Steel Round, an economical grade of stainless that is ideal for all applications where strength and superior corrosion resistance is required. 304 Stainless Round has a durable dull, mill finish that is widely used for all types of fabrication projects that are exposed to the elements – chemical, acidic, fresh water, and salt water environments.
Specifications: ASTM A276, QQS-763, T304/304L,non-polished finish
AKA: stainless rod, stainless round bar
Applications: frame work, braces, supports, shafting. axels, marine, food, etc.
Workability: Easy to Weld, Moderate Cutting, Forming and Machining.
Mechanical Properties: Brinell = 170, Tensile = 85,000 +/-, Yield = 34,000 +/-
Nonmagnetic
How is it Measured? Diameter (A) X Length
-
2.800,00 EGP
SPECIFICATIONS:
6061-T6; 6063-T6; ASTM B429
FINISH:
Extruded Mill Finish, Not Polished
CHARACTERISTICS:
Welding = Excellent
Machining / Grinding = Good
Bending / Forming = Fair
Wear Resistance = Fair
Corrosion Resistance = Good
MECHANICAL PROPERTIES:
Tensile Strength = 27 ksi (6063); 45 ksi (6061)
Yield Strength = 21 ksi (6063); 40 ksi (6061)
Elongation in 2″ = 18% (6063); 17% (6061)
Brinell Hardness = 60 (6063); 95 (6061)
*Data provided for reference only
AVAILABLE LENGTHS:
2ft, 4ft, 6ft, 8ft, 10ft, 20ft, or Custom Cut
Standard Length Tolerance = +/- 1/4″
Custom Cut Tolerance = +/- 1/16″
HOW TO MEASURE:
Nominal ID (A) X Schedule (wall) (B) X Length
* Dimensions in Inches
